LetLinkSo LLS-CD-1PC1OC-01 PCIe 4.0 x4 to Oculink SFF-8612 Internal Adapter Card
- PCIe to Oculink Ada…
- PCIe 4.0
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
LetLinkSo
Adds an Oculink SFF-8612 x4 port via a PCIe 4.0 x1 slot for NVMe SSDs or eGPUs at 16 GT/s per lane
Adapter Type PCIe x1 to 1-Port Oculink / External
This adapter adds an Oculink SFF-8612 x4 interface through a PCIe x1 slot. It targets builders connecting NVMe SSDs or eGPU docks using an SFF-8611 cable. Systems must run Windows, Windows Server or Linux. The card fits a single expansion slot and requires no extra drivers.
The link operates at the PCIe 4.0 standard with a 16 GT/s per lane rate across the x1 electrical connection. Real-world throughput is limited by the single lane rather than the x4 Oculink receptacle. Heavy sequential workloads will saturate the upstream lane before the downstream port reaches its nominal ceiling. Thermal output remains low because the board draws minimal power.
Insert the card into any free PCIe x1 slot and attach the SFF-8611 cable to the SFF-8612 port. The welded connector housing resists damage during repeated mating cycles. Boot support is included, but the host BIOS must expose the slot in PCIe or NVMe mode; some platforms require forcing Gen 3 and a cold restart. Buyers without a PCIe slot cannot use this adapter.
| Brand | LetLinkSo |
|---|---|
| Series | PCIe to Oculink Card |
| Model | LLS-CD-1PC1OC-03 |
| Type | PCIe to Oculink Adapter |
| Standard | PCIe 4.0 |
| Data Transfer Rate | 16GT/s (per lane) |
| Operating Systems Supported | Windows,Windows Server and Linux |
| Compatibility | PCIe 4.0 |
| Specifications | PCIe x1 to 1-port Oculink |
| Features | EXPANDED CONNECTIVITY |
| Weight | 1 lbs |
| Package Contents | 1 x PCIe x1 to 1-port Oculink Adapter |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The adapter itself is passive and draws minimal power; sustained heat depends on the attached NVMe drive or eGPU rather than the card.
You need an Oculink SFF-8611 cable and a compatible NVMe SSD or eGPU enclosure with an SFF-8611 input.
Yes, it is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 x1 slot.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?