LetLinkSo PCIe 4.0 x4 to Oculink SFF-8612 Adapter Card
- PCIe to Oculink Ada…
- PCIe 4.0
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
LetLinkSo
Adds an Oculink SFF-8612 x4 port via a PCIe 4.0 x1 slot for NVMe SSDs or eGPUs at 16 GT/s per lane
Adapter Type PCIe x1 to 1-Port Oculink / External
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
This adapter adds an Oculink SFF-8612 x4 interface through a PCIe x1 slot. It targets builders connecting NVMe SSDs or eGPU docks using an SFF-8611 cable. Systems must run Windows, Windows Server or Linux. The card fits a single expansion slot and requires no extra drivers.
The link operates at the PCIe 4.0 standard with a 16 GT/s per lane rate across the x1 electrical connection. Real-world throughput is limited by the single lane rather than the x4 Oculink receptacle. Heavy sequential workloads will saturate the upstream lane before the downstream port reaches its nominal ceiling. Thermal output remains low because the board draws minimal power.
Insert the card into any free PCIe x1 slot and attach the SFF-8611 cable to the SFF-8612 port. The welded connector housing resists damage during repeated mating cycles. Boot support is included, but the host BIOS must expose the slot in PCIe or NVMe mode; some platforms require forcing Gen 3 and a cold restart. Buyers without a PCIe slot cannot use this adapter.
| Brand | LetLinkSo |
|---|---|
| Series | PCIe to Oculink Card |
| Model | LLS-CD-1PC1OC-03 |
| Type | PCIe to Oculink Adapter |
| Standard | PCIe 4.0 |
| Data Transfer Rate | 16GT/s (per lane) |
| Operating Systems Supported | Windows,Windows Server and Linux |
| Compatibility | PCIe 4.0 |
| Specifications | PCIe x1 to 1-port Oculink |
| Features | EXPANDED CONNECTIVITY |
| Weight | 1 lbs |
| Package Contents | 1 x PCIe x1 to 1-port Oculink Adapter |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The adapter itself is passive and draws minimal power; sustained heat depends on the attached NVMe drive or eGPU rather than the card.
You need an Oculink SFF-8611 cable and a compatible NVMe SSD or eGPU enclosure with an SFF-8611 input.
Yes, it is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 x1 slot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?