EN-Labs
EN-Labs 11-001-370BL 120mm Case Fan Blue LED 15 LEDs 16dB 1200 RPM 3-Pin
- 1 Fan
- Case Fan
9,99 $
0.0001275BTC
Laos
EN-Labs
EN-Labs 11-001-371BL 120mm Blue LED case fan 33 LEDs 3-pin
A 120 mm sleeve-bearing case fan with 33 blue LEDs, 3-pin power and anti-vibration pads delivering up to 55 CFM at under 20 dBA
- TypeCase Fan
- CompatibilityCase
- Bearing TypeSleeve
- RPM<1600 RPM
- Air Flow50-55 CFM
- Noise Level15 - 20 dBA
- Ultra-quiet cooling at 16 dB noise level
- 33 blue LEDs create vivid lighting effects
- 120 mm sleeve-bearing fan delivers 50-55 CFM airflow
- Anti-vibration rubber pads reduce resonance and noise
- 3-pin and Molex 4-pin connectors for flexible power
120 mm Blue LED case fan with 33 LEDs
The EN-Labs 11-001-371BL is a 120 mm case fan designed for standard chassis mounts. It uses a sleeve bearing and a 3-pin power connector that also accepts a Molex 4-pin adapter. The fan targets builders who want blue accent lighting and basic airflow without PWM control.
Thermals noise and power draw
Rated speed is 1200 RPM with a 10 % tolerance and a maximum below 1600 RPM. Airflow reaches 50 to 55 CFM while noise stays between 15 and 20 dBA, quoted at 16 dBA with the same tolerance. Anti-vibration rubber pads are included to reduce transmitted vibration. The frame has cut-back processing on both sides to increase air volume.
Accessories and lighting impact
The package contains the fan and anti-vibration rubber pads only. No controller, splitter or software is bundled. The 33 blue LEDs provide a fixed colour effect that changes appearance with viewing angle but cannot be synchronised or dimmed. Builders who want addressable lighting or speed curves must add their own controller.
Põhijooned
- Ultra-quiet cooling at 16 dB noise level
- 33 blue LEDs create vivid lighting effects
- 120 mm sleeve-bearing fan delivers 50-55 CFM airflow
- Anti-vibration rubber pads reduce resonance and noise
- 3-pin and Molex 4-pin connectors for flexible power
Tehnilised andmed
| Brand | En-Labs |
|---|---|
| Model | 11-001-371BL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Sleeve |
| RPM | <1600 RPM |
| Air Flow | 50-55 CFM |
| Noise Level | 15 - 20 dBA |
| Power Connector | 3 Pin |
| Color | Blue |
| LED | Blue |
| Features | Features: 120mm Sleeve Bearing quiet cooling case fan for computer 33 leds Color LED, create a very amazing effect Combination of high efficiency heat dissipation and mute,9pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan p |
| Dimensions | 120x120x25mm |
| Package Contents | 12CM Case fan |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
EN-Labs
EN-Labs SR12025GN 120mm case fan Green LED 1200 RPM 16 dB 53.02 CFM
- Case Fan
- Case
12,99 $
0.00016579BTC
LaosKüsimused selle toote kohta
How do I install the EN-Labs 11-001-371BL fan and what step do people often miss?
Mount the fan using the four included anti-vibration rubber pads instead of screws, then plug the 3-pin connector into a motherboard header or the supplied Molex adapter.
What maintenance will the sleeve bearing need later?
Sleeve bearings cannot be relubricated; when noise rises above the rated 15-20 dBA or speed drops below 1200 RPM, replace the entire fan.
What limit appears first during sustained use?
The sleeve bearing’s wear rate limits lifespan; expect rising noise and falling airflow once the 1200 RPM rating can no longer be maintained.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001047BTC
Laos