暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue 120mm case fan with 33 LEDs and anti-vibration rubber pads

EN-Labs

EN-Labs 11-001-371BL 120mm Blue LED case fan 33 LEDs 3-pin

SKU CH-5NKN-1MRYM

A 120 mm sleeve-bearing case fan with 33 blue LEDs, 3-pin power and anti-vibration pads delivering up to 55 CFM at under 20 dBA

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve
  • RPM<1600 RPM
  • Air Flow50-55 CFM
  • Noise Level15 - 20 dBA

LED Blue

  • Ultra-quiet cooling at 16 dB noise level
  • 33 blue LEDs create vivid lighting effects
  • 120 mm sleeve-bearing fan delivers 50-55 CFM airflow
  • Anti-vibration rubber pads reduce resonance and noise
  • 3-pin and Molex 4-pin connectors for flexible power

120 mm Blue LED case fan with 33 LEDs

The EN-Labs 11-001-371BL is a 120 mm case fan designed for standard chassis mounts. It uses a sleeve bearing and a 3-pin power connector that also accepts a Molex 4-pin adapter. The fan targets builders who want blue accent lighting and basic airflow without PWM control.

Thermals noise and power draw

Rated speed is 1200 RPM with a 10 % tolerance and a maximum below 1600 RPM. Airflow reaches 50 to 55 CFM while noise stays between 15 and 20 dBA, quoted at 16 dBA with the same tolerance. Anti-vibration rubber pads are included to reduce transmitted vibration. The frame has cut-back processing on both sides to increase air volume.

Accessories and lighting impact

The package contains the fan and anti-vibration rubber pads only. No controller, splitter or software is bundled. The 33 blue LEDs provide a fixed colour effect that changes appearance with viewing angle but cannot be synchronised or dimmed. Builders who want addressable lighting or speed curves must add their own controller.

特長

  • Ultra-quiet cooling at 16 dB noise level
  • 33 blue LEDs create vivid lighting effects
  • 120 mm sleeve-bearing fan delivers 50-55 CFM airflow
  • Anti-vibration rubber pads reduce resonance and noise
  • 3-pin and Molex 4-pin connectors for flexible power

仕様

BrandEn-Labs
Model11-001-371BL
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve
RPM<1600 RPM
Air Flow50-55 CFM
Noise Level15 - 20 dBA
Power Connector3 Pin
ColorBlue
LEDBlue
FeaturesFeatures: 120mm Sleeve Bearing quiet cooling case fan for computer 33 leds Color LED, create a very amazing effect Combination of high efficiency heat dissipation and mute,9pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan p
Dimensions120x120x25mm
Package Contents12CM Case fan

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the EN-Labs 11-001-371BL fan and what step do people often miss?

Mount the fan using the four included anti-vibration rubber pads instead of screws, then plug the 3-pin connector into a motherboard header or the supplied Molex adapter.

What maintenance will the sleeve bearing need later?

Sleeve bearings cannot be relubricated; when noise rises above the rated 15-20 dBA or speed drops below 1200 RPM, replace the entire fan.

What limit appears first during sustained use?

The sleeve bearing’s wear rate limits lifespan; expect rising noise and falling airflow once the 1200 RPM rating can no longer be maintained.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。