EN-Labs 11-001-370BL 120mm Case Fan Blue LED 15 LEDs 16dB 1200 RPM 3-Pin
- 1 Fan
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
EN-Labs
A 120 mm sleeve-bearing case fan with 33 blue LEDs, 3-pin power and anti-vibration pads delivering up to 55 CFM at under 20 dBA
The EN-Labs 11-001-371BL is a 120 mm case fan designed for standard chassis mounts. It uses a sleeve bearing and a 3-pin power connector that also accepts a Molex 4-pin adapter. The fan targets builders who want blue accent lighting and basic airflow without PWM control.
Rated speed is 1200 RPM with a 10 % tolerance and a maximum below 1600 RPM. Airflow reaches 50 to 55 CFM while noise stays between 15 and 20 dBA, quoted at 16 dBA with the same tolerance. Anti-vibration rubber pads are included to reduce transmitted vibration. The frame has cut-back processing on both sides to increase air volume.
The package contains the fan and anti-vibration rubber pads only. No controller, splitter or software is bundled. The 33 blue LEDs provide a fixed colour effect that changes appearance with viewing angle but cannot be synchronised or dimmed. Builders who want addressable lighting or speed curves must add their own controller.
| Brand | En-Labs |
|---|---|
| Model | 11-001-371BL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Sleeve |
| RPM | <1600 RPM |
| Air Flow | 50-55 CFM |
| Noise Level | 15 - 20 dBA |
| Power Connector | 3 Pin |
| Color | Blue |
| LED | Blue |
| Features | Features: 120mm Sleeve Bearing quiet cooling case fan for computer 33 leds Color LED, create a very amazing effect Combination of high efficiency heat dissipation and mute,9pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan p |
| Dimensions | 120x120x25mm |
| Package Contents | 12CM Case fan |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Mount the fan using the four included anti-vibration rubber pads instead of screws, then plug the 3-pin connector into a motherboard header or the supplied Molex adapter.
Sleeve bearings cannot be relubricated; when noise rises above the rated 15-20 dBA or speed drops below 1200 RPM, replace the entire fan.
The sleeve bearing’s wear rate limits lifespan; expect rising noise and falling airflow once the 1200 RPM rating can no longer be maintained.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?