EN-Labs 11-001-370BL 120mm Case Fan Blue LED 15 LEDs 16dB 1200 RPM 3-Pin
- 1 Fan
- Case Fan
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
EN-Labs
A 120 mm sleeve-bearing case fan with 33 blue LEDs, 3-pin power and anti-vibration pads delivering up to 55 CFM at under 20 dBA
The EN-Labs 11-001-371BL is a 120 mm case fan designed for standard chassis mounts. It uses a sleeve bearing and a 3-pin power connector that also accepts a Molex 4-pin adapter. The fan targets builders who want blue accent lighting and basic airflow without PWM control.
Rated speed is 1200 RPM with a 10 % tolerance and a maximum below 1600 RPM. Airflow reaches 50 to 55 CFM while noise stays between 15 and 20 dBA, quoted at 16 dBA with the same tolerance. Anti-vibration rubber pads are included to reduce transmitted vibration. The frame has cut-back processing on both sides to increase air volume.
The package contains the fan and anti-vibration rubber pads only. No controller, splitter or software is bundled. The 33 blue LEDs provide a fixed colour effect that changes appearance with viewing angle but cannot be synchronised or dimmed. Builders who want addressable lighting or speed curves must add their own controller.
| Brand | En-Labs |
|---|---|
| Model | 11-001-371BL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Sleeve |
| RPM | <1600 RPM |
| Air Flow | 50-55 CFM |
| Noise Level | 15 - 20 dBA |
| Power Connector | 3 Pin |
| Color | Blue |
| LED | Blue |
| Features | Features: 120mm Sleeve Bearing quiet cooling case fan for computer 33 leds Color LED, create a very amazing effect Combination of high efficiency heat dissipation and mute,9pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan p |
| Dimensions | 120x120x25mm |
| Package Contents | 12CM Case fan |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Mount the fan using the four included anti-vibration rubber pads instead of screws, then plug the 3-pin connector into a motherboard header or the supplied Molex adapter.
Sleeve bearings cannot be relubricated; when noise rises above the rated 15-20 dBA or speed drops below 1200 RPM, replace the entire fan.
The sleeve bearing’s wear rate limits lifespan; expect rising noise and falling airflow once the 1200 RPM rating can no longer be maintained.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?