EN-Labs 11-001-370BL 120mm Case Fan Blue LED 15 LEDs 16dB 1200 RPM 3-Pin
- 1 Fan
- Case Fan
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
A 120 mm sleeve-bearing case fan with 33 blue LEDs, 3-pin power and anti-vibration pads delivering up to 55 CFM at under 20 dBA
The EN-Labs 11-001-371BL is a 120 mm case fan designed for standard chassis mounts. It uses a sleeve bearing and a 3-pin power connector that also accepts a Molex 4-pin adapter. The fan targets builders who want blue accent lighting and basic airflow without PWM control.
Rated speed is 1200 RPM with a 10 % tolerance and a maximum below 1600 RPM. Airflow reaches 50 to 55 CFM while noise stays between 15 and 20 dBA, quoted at 16 dBA with the same tolerance. Anti-vibration rubber pads are included to reduce transmitted vibration. The frame has cut-back processing on both sides to increase air volume.
The package contains the fan and anti-vibration rubber pads only. No controller, splitter or software is bundled. The 33 blue LEDs provide a fixed colour effect that changes appearance with viewing angle but cannot be synchronised or dimmed. Builders who want addressable lighting or speed curves must add their own controller.
| Brand | En-Labs |
|---|---|
| Model | 11-001-371BL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Sleeve |
| RPM | <1600 RPM |
| Air Flow | 50-55 CFM |
| Noise Level | 15 - 20 dBA |
| Power Connector | 3 Pin |
| Color | Blue |
| LED | Blue |
| Features | Features: 120mm Sleeve Bearing quiet cooling case fan for computer 33 leds Color LED, create a very amazing effect Combination of high efficiency heat dissipation and mute,9pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan p |
| Dimensions | 120x120x25mm |
| Package Contents | 12CM Case fan |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Mount the fan using the four included anti-vibration rubber pads instead of screws, then plug the 3-pin connector into a motherboard header or the supplied Molex adapter.
Sleeve bearings cannot be relubricated; when noise rises above the rated 15-20 dBA or speed drops below 1200 RPM, replace the entire fan.
The sleeve bearing’s wear rate limits lifespan; expect rising noise and falling airflow once the 1200 RPM rating can no longer be maintained.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?