OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
In Win
A black Micro ATX mini tower with front USB 3.0, 2.0 and HD audio, one 5.25 inch bay, three 3.5 inch bays, one 2.5 inch bay, a rear 90mm fan slot and clearance for 320mm GPU.
The In Win EN708X.B3 is a black Mini Tower chassis that accepts Micro ATX and Mini ITX motherboards. It provides four expansion slots and a single external 5.25 inch bay for optical drives or accessories. The design omits a side window, keeping the interior out of sight.
Confirm your board is Micro ATX or Mini ITX; larger ATX boards will not fit. Check that three internal 3.5 inch bays and one 2.5 inch bay cover your storage plan. Ensure the power supply you intend to use does not exceed 220 mm in length.
A single 90 mm rear mount is the only factory fan location, so thermal performance depends on that exhaust and any passive intake through the front panel. The 160 mm CPU cooler clearance accommodates most tower coolers, while the 320 mm GPU limit fits full-length graphics cards. Power draw and noise will follow the components you install.
| Brand | IN WIN |
|---|---|
| Model | EN708X.B3 |
| Type | Micro ATX Mini Tower |
| Color | Black |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | without Side Window |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | 2 x USB 3.0 / 2 x USB 2.0 / HD Audio |
| Fan Options | Rear - 1 x 90mm |
| Max GPU Length | 320 mm |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 220 mm |
| Dimensions | 13.80" x 6.60" x 15.50" (w/ Front Panel) 13.80" x 6.60" x 14.20" (w/o Front Panel) |
| Tarnekaal | 3.54 kg |
| Pakendi mõõtmed | 445 × 381 × 203 mm |
The case ships with a pre-installed rear 90 mm fan, four expansion-slot covers, and the mounting hardware for Micro ATX or Mini ITX boards. You must supply the power supply, motherboard, CPU cooler, graphics card, storage drives, and any additional fans.
This model includes one external 5.25" bay, so it is the correct choice if you need an optical drive or front-access device; there is no alternative version of the EN708X.B3 without that bay.
Yes — the chassis allows up to 320 mm for the GPU and 160 mm for the cooler; the 220 mm PSU limit leaves enough room behind the motherboard tray for typical cable routing without reducing those clearances.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?