NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
In Win
A black Micro ATX mini tower with front USB 3.0, 2.0 and HD audio, one 5.25 inch bay, three 3.5 inch bays, one 2.5 inch bay, a rear 90mm fan slot and clearance for 320mm GPU.
The In Win EN708X.B3 is a black Mini Tower chassis that accepts Micro ATX and Mini ITX motherboards. It provides four expansion slots and a single external 5.25 inch bay for optical drives or accessories. The design omits a side window, keeping the interior out of sight.
Confirm your board is Micro ATX or Mini ITX; larger ATX boards will not fit. Check that three internal 3.5 inch bays and one 2.5 inch bay cover your storage plan. Ensure the power supply you intend to use does not exceed 220 mm in length.
A single 90 mm rear mount is the only factory fan location, so thermal performance depends on that exhaust and any passive intake through the front panel. The 160 mm CPU cooler clearance accommodates most tower coolers, while the 320 mm GPU limit fits full-length graphics cards. Power draw and noise will follow the components you install.
| Brand | IN WIN |
|---|---|
| Model | EN708X.B3 |
| Type | Micro ATX Mini Tower |
| Color | Black |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | without Side Window |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | 2 x USB 3.0 / 2 x USB 2.0 / HD Audio |
| Fan Options | Rear - 1 x 90mm |
| Max GPU Length | 320 mm |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 220 mm |
| Dimensions | 13.80" x 6.60" x 15.50" (w/ Front Panel) 13.80" x 6.60" x 14.20" (w/o Front Panel) |
| Prepravná hmotnosť | 3.54 kg |
| Rozmery balenia | 445 × 381 × 203 mm |
The case ships with a pre-installed rear 90 mm fan, four expansion-slot covers, and the mounting hardware for Micro ATX or Mini ITX boards. You must supply the power supply, motherboard, CPU cooler, graphics card, storage drives, and any additional fans.
This model includes one external 5.25" bay, so it is the correct choice if you need an optical drive or front-access device; there is no alternative version of the EN708X.B3 without that bay.
Yes — the chassis allows up to 320 mm for the GPU and 160 mm for the cooler; the 220 mm PSU limit leaves enough room behind the motherboard tray for typical cable routing without reducing those clearances.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?