NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
In Win
A black Micro ATX mini tower with front USB 3.0, 2.0 and HD audio, one 5.25 inch bay, three 3.5 inch bays, one 2.5 inch bay, a rear 90mm fan slot and clearance for 320mm GPU.
The In Win EN708X.B3 is a black Mini Tower chassis that accepts Micro ATX and Mini ITX motherboards. It provides four expansion slots and a single external 5.25 inch bay for optical drives or accessories. The design omits a side window, keeping the interior out of sight.
Confirm your board is Micro ATX or Mini ITX; larger ATX boards will not fit. Check that three internal 3.5 inch bays and one 2.5 inch bay cover your storage plan. Ensure the power supply you intend to use does not exceed 220 mm in length.
A single 90 mm rear mount is the only factory fan location, so thermal performance depends on that exhaust and any passive intake through the front panel. The 160 mm CPU cooler clearance accommodates most tower coolers, while the 320 mm GPU limit fits full-length graphics cards. Power draw and noise will follow the components you install.
| Brand | IN WIN |
|---|---|
| Model | EN708X.B3 |
| Type | Micro ATX Mini Tower |
| Color | Black |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | without Side Window |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | 2 x USB 3.0 / 2 x USB 2.0 / HD Audio |
| Fan Options | Rear - 1 x 90mm |
| Max GPU Length | 320 mm |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 220 mm |
| Dimensions | 13.80" x 6.60" x 15.50" (w/ Front Panel) 13.80" x 6.60" x 14.20" (w/o Front Panel) |
| Forsendelsesvægt | 3.54 kg |
| Pakkestørrelse | 445 × 381 × 203 mm |
The case ships with a pre-installed rear 90 mm fan, four expansion-slot covers, and the mounting hardware for Micro ATX or Mini ITX boards. You must supply the power supply, motherboard, CPU cooler, graphics card, storage drives, and any additional fans.
This model includes one external 5.25" bay, so it is the correct choice if you need an optical drive or front-access device; there is no alternative version of the EN708X.B3 without that bay.
Yes — the chassis allows up to 320 mm for the GPU and 160 mm for the cooler; the 220 mm PSU limit leaves enough room behind the motherboard tray for typical cable routing without reducing those clearances.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?