نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black Micro ATX mini tower case, solid side panel, front USB and audio ports

In Win

In Win EN708X.B3 Micro ATX Mini Tower PC Case

SKU CH-FAFP-81RX7 MPN EN708X.B3

A black Micro ATX mini tower with front USB 3.0, 2.0 and HD audio, one 5.25 inch bay, three 3.5 inch bays, one 2.5 inch bay, a rear 90mm fan slot and clearance for 320mm GPU.

  • TypeMicro ATX Mini Tower
  • ColorBlack
  • Motherboard CompatibilityMicro ATX / Mini ITX
  • Side Panelwithout Side Window
  • External 5.25" Drive Bays1
  • Internal 3.5" Drive Bays3
  • Compact Micro ATX tower fits tight desk spaces
  • Four USB front ports give fast peripheral access
  • Single 5.25 inch bay keeps optical drives handy
  • Three 3.5 inch bays store plenty of bulk data
  • 320 mm GPU clearance handles full-length graphics cards

Compact Micro ATX Build Platform

The In Win EN708X.B3 is a black Mini Tower chassis that accepts Micro ATX and Mini ITX motherboards. It provides four expansion slots and a single external 5.25 inch bay for optical drives or accessories. The design omits a side window, keeping the interior out of sight.

Verify Motherboard Form Factor and Drive Needs

Confirm your board is Micro ATX or Mini ITX; larger ATX boards will not fit. Check that three internal 3.5 inch bays and one 2.5 inch bay cover your storage plan. Ensure the power supply you intend to use does not exceed 220 mm in length.

Rear 90 mm Fan Handles Airflow

A single 90 mm rear mount is the only factory fan location, so thermal performance depends on that exhaust and any passive intake through the front panel. The 160 mm CPU cooler clearance accommodates most tower coolers, while the 320 mm GPU limit fits full-length graphics cards. Power draw and noise will follow the components you install.

أبرز المميزات

  • Compact Micro ATX tower fits tight desk spaces
  • Four USB front ports give fast peripheral access
  • Single 5.25 inch bay keeps optical drives handy
  • Three 3.5 inch bays store plenty of bulk data
  • 320 mm GPU clearance handles full-length graphics cards

المواصفات

BrandIN WIN
ModelEN708X.B3
TypeMicro ATX Mini Tower
ColorBlack
Motherboard CompatibilityMicro ATX / Mini ITX
Side Panelwithout Side Window
External 5.25" Drive Bays1
Internal 3.5" Drive Bays3
Internal 2.5" Drive Bays1
Expansion Slots4
Front Ports2 x USB 3.0 / 2 x USB 2.0 / HD Audio
Fan OptionsRear - 1 x 90mm
Max GPU Length320 mm
Max CPU Cooler Height160 mm
Max PSU Length220 mm
Dimensions13.80" x 6.60" x 15.50" (w/ Front Panel)
13.80" x 6.60" x 14.20" (w/o Front Panel)
وزن الشحنة3.54 kg
أبعاد الطرد445 × 381 × 203 mm

أسئلة حول هذا المنتج

What comes in the box with the EN708X.B3 and what do I need to buy separately?

The case ships with a pre-installed rear 90 mm fan, four expansion-slot covers, and the mounting hardware for Micro ATX or Mini ITX boards. You must supply the power supply, motherboard, CPU cooler, graphics card, storage drives, and any additional fans.

Should I pick the 5.25" bay version or a model without it for my optical drive?

This model includes one external 5.25" bay, so it is the correct choice if you need an optical drive or front-access device; there is no alternative version of the EN708X.B3 without that bay.

Will a 320 mm graphics card and 160 mm CPU cooler actually fit once cables are routed?

Yes — the chassis allows up to 320 mm for the GPU and 160 mm for the cooler; the 220 mm PSU limit leaves enough room behind the motherboard tray for typical cable routing without reducing those clearances.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.