EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
In Win
A black Micro ATX mini tower with front USB 3.0, 2.0 and HD audio, one 5.25 inch bay, three 3.5 inch bays, one 2.5 inch bay, a rear 90mm fan slot and clearance for 320mm GPU.
The In Win EN708X.B3 is a black Mini Tower chassis that accepts Micro ATX and Mini ITX motherboards. It provides four expansion slots and a single external 5.25 inch bay for optical drives or accessories. The design omits a side window, keeping the interior out of sight.
Confirm your board is Micro ATX or Mini ITX; larger ATX boards will not fit. Check that three internal 3.5 inch bays and one 2.5 inch bay cover your storage plan. Ensure the power supply you intend to use does not exceed 220 mm in length.
A single 90 mm rear mount is the only factory fan location, so thermal performance depends on that exhaust and any passive intake through the front panel. The 160 mm CPU cooler clearance accommodates most tower coolers, while the 320 mm GPU limit fits full-length graphics cards. Power draw and noise will follow the components you install.
| Brand | IN WIN |
|---|---|
| Model | EN708X.B3 |
| Type | Micro ATX Mini Tower |
| Color | Black |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | without Side Window |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | 2 x USB 3.0 / 2 x USB 2.0 / HD Audio |
| Fan Options | Rear - 1 x 90mm |
| Max GPU Length | 320 mm |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 220 mm |
| Dimensions | 13.80" x 6.60" x 15.50" (w/ Front Panel) 13.80" x 6.60" x 14.20" (w/o Front Panel) |
| Siuntos svoris | 3.54 kg |
| Pakuotės dydis | 445 × 381 × 203 mm |
The case ships with a pre-installed rear 90 mm fan, four expansion-slot covers, and the mounting hardware for Micro ATX or Mini ITX boards. You must supply the power supply, motherboard, CPU cooler, graphics card, storage drives, and any additional fans.
This model includes one external 5.25" bay, so it is the correct choice if you need an optical drive or front-access device; there is no alternative version of the EN708X.B3 without that bay.
Yes — the chassis allows up to 320 mm for the GPU and 160 mm for the cooler; the 220 mm PSU limit leaves enough room behind the motherboard tray for typical cable routing without reducing those clearances.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?