SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501651BTC
Laos
LORDWORLD
LORDWORLD ESP32-P4-Pico development board
IoT development board with dual-core RISC-V processor, 32MB PSRAM, 32MB Flash, MIPI camera and display interfaces, USB 2.0 OTG, SD card slot, audio headers, and 27 programmable GPIOs
- High-performance RISC-V dual-core and single-core processors enable complex edge tasks
- 32 MB PSRAM and 32 MB Nor Flash provide ample memory for image and voice processing
- Hardware JPEG Codec, Pixel Processing Accelerator, ISP and H.264 encoder accelerate multimedia workloads
- MIPI-CSI, MIPI-DSI, USB 2.0 OTG and SDIO 3.0 TF card slot connect cameras, displays and storage
- 27 programmable GPIOs on 2×20 headers plus Secure Boot, Flash Encryption and TRNG secure deployments
LORDWORLD ESP32-P4-Pico Development Board
This development board centres on a high-performance ESP32-P4 MCU that combines RISC-V 32-bit dual-core and single-core processors. It integrates 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM. The package includes 32MB PSRAM and onboard 32MB Nor Flash. Onboard peripherals cover MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone and speaker header.
Makers building vision or voice edge devices
The board suits engineers who need JPEG Codec, Pixel Processing Accelerator, Image Signal Processor and H.264 encoder hardware on a compact platform. Security features include Secure Boot, Flash Encryption, cryptographic accelerators, TRNG and hardware access protection for privilege separation. Developers requiring wireless radios, additional GPIO beyond the 27 programmable pins exposed on the 2*20 headers, or a different MCU architecture should evaluate other modules.
Fits into a custom carrier
The 27 remaining programmable GPIOs connect sensors, displays or storage directly. Onboard MIPI-CSI and MIPI-DSI simplify camera and screen integration without extra level-shifters. USB 2.0 OTG provides host or device connectivity for data or power. The TF card slot adds removable storage for logs or model weights. This layout frees PCB space by keeping PSRAM, flash and core peripherals on the module.
Põhijooned
- High-performance RISC-V dual-core and single-core processors enable complex edge tasks
- 32 MB PSRAM and 32 MB Nor Flash provide ample memory for image and voice processing
- Hardware JPEG Codec, Pixel Processing Accelerator, ISP and H.264 encoder accelerate multimedia workloads
- MIPI-CSI, MIPI-DSI, USB 2.0 OTG and SDIO 3.0 TF card slot connect cameras, displays and storage
- 27 programmable GPIOs on 2×20 headers plus Secure Boot, Flash Encryption and TRNG secure deployments
Tehnilised andmed
| Brand | LORDWORLD |
|---|
Küsimused selle toote kohta
Which power source is required to run the ESP32-P4-Pico board?
Connect a USB 2.0 OTG cable to the onboard USB 2.0 OTG port to supply power and enable flashing.
Will the 2×20 GPIO header on this board fit the same pinout as my existing Raspberry Pi HAT?
The board exposes 27 programmable GPIOs on a 2×20 header; check your HAT's pin assignments against the ESP32-P4-Pico schematic before connecting.
How can I confirm the JPEG Codec and H.264 encoder are functioning after flashing firmware?
Capture an image via the MIPI-CSI interface and verify the board outputs a compressed JPEG or H.264 stream over USB 2.0 OTG or the SDIO 3.0 TF card slot.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
