我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with dual 20-pin headers and onboard components

LORDWORLD

LORDWORLD ESP32-P4-Pico development board

SKU CH-MPDB-BB089

IoT development board with dual-core RISC-V processor, 32MB PSRAM, 32MB Flash, MIPI camera and display interfaces, USB 2.0 OTG, SD card slot, audio headers, and 27 programmable GPIOs

  • High-performance RISC-V dual-core and single-core processors enable complex edge tasks
  • 32 MB PSRAM and 32 MB Nor Flash provide ample memory for image and voice processing
  • Hardware JPEG Codec, Pixel Processing Accelerator, ISP and H.264 encoder accelerate multimedia workloads
  • MIPI-CSI, MIPI-DSI, USB 2.0 OTG and SDIO 3.0 TF card slot connect cameras, displays and storage
  • 27 programmable GPIOs on 2×20 headers plus Secure Boot, Flash Encryption and TRNG secure deployments

LORDWORLD ESP32-P4-Pico Development Board

This development board centres on a high-performance ESP32-P4 MCU that combines RISC-V 32-bit dual-core and single-core processors. It integrates 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM. The package includes 32MB PSRAM and onboard 32MB Nor Flash. Onboard peripherals cover MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone and speaker header.

Makers building vision or voice edge devices

The board suits engineers who need JPEG Codec, Pixel Processing Accelerator, Image Signal Processor and H.264 encoder hardware on a compact platform. Security features include Secure Boot, Flash Encryption, cryptographic accelerators, TRNG and hardware access protection for privilege separation. Developers requiring wireless radios, additional GPIO beyond the 27 programmable pins exposed on the 2*20 headers, or a different MCU architecture should evaluate other modules.

Fits into a custom carrier

The 27 remaining programmable GPIOs connect sensors, displays or storage directly. Onboard MIPI-CSI and MIPI-DSI simplify camera and screen integration without extra level-shifters. USB 2.0 OTG provides host or device connectivity for data or power. The TF card slot adds removable storage for logs or model weights. This layout frees PCB space by keeping PSRAM, flash and core peripherals on the module.

商品特色

  • High-performance RISC-V dual-core and single-core processors enable complex edge tasks
  • 32 MB PSRAM and 32 MB Nor Flash provide ample memory for image and voice processing
  • Hardware JPEG Codec, Pixel Processing Accelerator, ISP and H.264 encoder accelerate multimedia workloads
  • MIPI-CSI, MIPI-DSI, USB 2.0 OTG and SDIO 3.0 TF card slot connect cameras, displays and storage
  • 27 programmable GPIOs on 2×20 headers plus Secure Boot, Flash Encryption and TRNG secure deployments

商品規格

BrandLORDWORLD

商品問答

Which power source is required to run the ESP32-P4-Pico board?

Connect a USB 2.0 OTG cable to the onboard USB 2.0 OTG port to supply power and enable flashing.

Will the 2×20 GPIO header on this board fit the same pinout as my existing Raspberry Pi HAT?

The board exposes 27 programmable GPIOs on a 2×20 header; check your HAT's pin assignments against the ESP32-P4-Pico schematic before connecting.

How can I confirm the JPEG Codec and H.264 encoder are functioning after flashing firmware?

Capture an image via the MIPI-CSI interface and verify the board outputs a compressed JPEG or H.264 stream over USB 2.0 OTG or the SDIO 3.0 TF card slot.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。