SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Seagate
1 TB desktop drive with 7200 RPM, 32 MB cache, SATA 3.0 Gb/s interface and 4.16 ms average latency
The Seagate BarraCuda 7200.11 ST31000340AS is a 1TB 3.5-inch internal hard drive for desktop computers. It spins at 7200 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive uses second-generation perpendicular recording technology and supports Native Command Queuing.
This drive suits users adding bulk storage to a desktop that accepts a 3.5-inch SATA drive. It is not for systems limited to 2.5-inch bays or laptops. Buyers needing an out-of-the-box formatted volume should look elsewhere, as the drive ships unformatted and unpartitioned. It also does not suit anyone requiring a pristine cosmetic appearance, since labels may show markings or colour variation.
The supplier notes that units may contain up to 25 bad sectors and are sold as tested working used drives despite the new condition flag. This tolerance is the single specification that determines whether the drive matches your reliability requirements. If your workload cannot accept any defective sectors, choose a different drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.11 |
| Model | ST31000340AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Latency | 4.16ms |
| Features | Proven second-generation perpendicular recording technology Native Command Queuing |
| Form Factor | 3.5" |
| Tarnekaal | 0.68 kg |
| Pakendi mõõtmed | 147 × 102 × 30 mm |
The drive fits a standard 3.5" bay and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive with four 6-32 screws, attach both SATA data and power cables, then initialise and format the 1TB volume in Disk Management before use.
Replace the drive if SMART reallocated sectors approach the 25-sector threshold or if seek errors appear, as the 7200 RPM mechanism ages.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?