SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Seagate
1 TB desktop drive with 7200 RPM, 32 MB cache, SATA 3.0 Gb/s interface and 4.16 ms average latency
The Seagate BarraCuda 7200.11 ST31000340AS is a 1TB 3.5-inch internal hard drive for desktop computers. It spins at 7200 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive uses second-generation perpendicular recording technology and supports Native Command Queuing.
This drive suits users adding bulk storage to a desktop that accepts a 3.5-inch SATA drive. It is not for systems limited to 2.5-inch bays or laptops. Buyers needing an out-of-the-box formatted volume should look elsewhere, as the drive ships unformatted and unpartitioned. It also does not suit anyone requiring a pristine cosmetic appearance, since labels may show markings or colour variation.
The supplier notes that units may contain up to 25 bad sectors and are sold as tested working used drives despite the new condition flag. This tolerance is the single specification that determines whether the drive matches your reliability requirements. If your workload cannot accept any defective sectors, choose a different drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.11 |
| Model | ST31000340AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Latency | 4.16ms |
| Features | Proven second-generation perpendicular recording technology Native Command Queuing |
| Form Factor | 3.5" |
| Siuntos svoris | 0.68 kg |
| Pakuotės dydis | 147 × 102 × 30 mm |
The drive fits a standard 3.5" bay and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive with four 6-32 screws, attach both SATA data and power cables, then initialise and format the 1TB volume in Disk Management before use.
Replace the drive if SMART reallocated sectors approach the 25-sector threshold or if seek errors appear, as the 7200 RPM mechanism ages.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?