SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Seagate
1 TB desktop drive with 7200 RPM, 32 MB cache, SATA 3.0 Gb/s interface and 4.16 ms average latency
The Seagate BarraCuda 7200.11 ST31000340AS is a 1TB 3.5-inch internal hard drive for desktop computers. It spins at 7200 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive uses second-generation perpendicular recording technology and supports Native Command Queuing.
This drive suits users adding bulk storage to a desktop that accepts a 3.5-inch SATA drive. It is not for systems limited to 2.5-inch bays or laptops. Buyers needing an out-of-the-box formatted volume should look elsewhere, as the drive ships unformatted and unpartitioned. It also does not suit anyone requiring a pristine cosmetic appearance, since labels may show markings or colour variation.
The supplier notes that units may contain up to 25 bad sectors and are sold as tested working used drives despite the new condition flag. This tolerance is the single specification that determines whether the drive matches your reliability requirements. If your workload cannot accept any defective sectors, choose a different drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.11 |
| Model | ST31000340AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Latency | 4.16ms |
| Features | Proven second-generation perpendicular recording technology Native Command Queuing |
| Form Factor | 3.5" |
| Prepravná hmotnosť | 0.68 kg |
| Rozmery balenia | 147 × 102 × 30 mm |
The drive fits a standard 3.5" bay and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive with four 6-32 screws, attach both SATA data and power cables, then initialise and format the 1TB volume in Disk Management before use.
Replace the drive if SMART reallocated sectors approach the 25-sector threshold or if seek errors appear, as the 7200 RPM mechanism ages.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?