SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Seagate
1 TB desktop drive with 7200 RPM, 32 MB cache, SATA 3.0 Gb/s interface and 4.16 ms average latency
The Seagate BarraCuda 7200.11 ST31000340AS is a 1TB 3.5-inch internal hard drive for desktop computers. It spins at 7200 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive uses second-generation perpendicular recording technology and supports Native Command Queuing.
This drive suits users adding bulk storage to a desktop that accepts a 3.5-inch SATA drive. It is not for systems limited to 2.5-inch bays or laptops. Buyers needing an out-of-the-box formatted volume should look elsewhere, as the drive ships unformatted and unpartitioned. It also does not suit anyone requiring a pristine cosmetic appearance, since labels may show markings or colour variation.
The supplier notes that units may contain up to 25 bad sectors and are sold as tested working used drives despite the new condition flag. This tolerance is the single specification that determines whether the drive matches your reliability requirements. If your workload cannot accept any defective sectors, choose a different drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.11 |
| Model | ST31000340AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Latency | 4.16ms |
| Features | Proven second-generation perpendicular recording technology Native Command Queuing |
| Form Factor | 3.5" |
| Verzendgewicht | 0.68 kg |
| Pakketafmetingen | 147 × 102 × 30 mm |
The drive fits a standard 3.5" bay and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive with four 6-32 screws, attach both SATA data and power cables, then initialise and format the 1TB volume in Disk Management before use.
Replace the drive if SMART reallocated sectors approach the 25-sector threshold or if seek errors appear, as the 7200 RPM mechanism ages.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?