SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Seagate
1 TB desktop drive with 7200 RPM, 32 MB cache, SATA 3.0 Gb/s interface and 4.16 ms average latency
The Seagate BarraCuda 7200.11 ST31000340AS is a 1TB 3.5-inch internal hard drive for desktop computers. It spins at 7200 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive uses second-generation perpendicular recording technology and supports Native Command Queuing.
This drive suits users adding bulk storage to a desktop that accepts a 3.5-inch SATA drive. It is not for systems limited to 2.5-inch bays or laptops. Buyers needing an out-of-the-box formatted volume should look elsewhere, as the drive ships unformatted and unpartitioned. It also does not suit anyone requiring a pristine cosmetic appearance, since labels may show markings or colour variation.
The supplier notes that units may contain up to 25 bad sectors and are sold as tested working used drives despite the new condition flag. This tolerance is the single specification that determines whether the drive matches your reliability requirements. If your workload cannot accept any defective sectors, choose a different drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.11 |
| Model | ST31000340AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Latency | 4.16ms |
| Features | Proven second-generation perpendicular recording technology Native Command Queuing |
| Form Factor | 3.5" |
| Sendingarþyngd | 0.68 kg |
| Stærð sendingar | 147 × 102 × 30 mm |
The drive fits a standard 3.5" bay and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive with four 6-32 screws, attach both SATA data and power cables, then initialise and format the 1TB volume in Disk Management before use.
Replace the drive if SMART reallocated sectors approach the 25-sector threshold or if seek errors appear, as the 7200 RPM mechanism ages.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?