Zyvpee
Zyvpee AD0912UB-A7BGL 90x25mm 4-pin case fan
A 90×25 mm ball-bearing case fan with a 4-pin PWM connector for 12 V CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Fan
- 12 V 0.45 A 4-pin PWM control for precise speed adjustment
- 90 mm x 25 mm compact frame fits tight case layouts
- Ball bearing design extends operating lifespan
- Non-LED black finish keeps builds clean and professional
- 4-wire connector enables motherboard fan curve management
90 mm 4-pin ball-bearing fan
The Zyvpee AD0912UB-A7BGL is a 90 by 25 mm case fan built for compact CPU coolers and tight chassis. It runs on 12 V at 0.45 A through a standard 4-pin PWM connector, so the motherboard can regulate speed automatically. The black, non-LED frame keeps the look neutral for any build.
Sustained airflow with ball bearing
A ball bearing handles continuous rotation with less friction wear than sleeve alternatives, keeping noise and vibration stable over long sessions. The 4-wire control lets the curve ramp up only when thermals demand it, so the fan stays quieter at idle while still moving air under load. No lighting means zero extra electrical draw.
Straightforward 4-pin mounting
Four corner screw holes match the 90 mm standard, and the keyed 4-pin plug prevents reversed insertion. The only common snag is cable reach in larger towers; an extension may be needed if the header sits far from the mount. Verify the 90 mm hole pattern before ordering.
Põhijooned
- 12 V 0.45 A 4-pin PWM control for precise speed adjustment
- 90 mm x 25 mm compact frame fits tight case layouts
- Ball bearing design extends operating lifespan
- Non-LED black finish keeps builds clean and professional
- 4-wire connector enables motherboard fan curve management
Tehnilised andmed
| Brand | 3ccooler.com |
|---|---|
| Series | AD0912UB-A7BGL |
| Model | AD0912UB-A7BGL |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 90*25mm |
Küsimused selle toote kohta
How much heat and noise does the 12 V 0.45 A ball-bearing fan produce when running continuously?
The fan draws 0.45 A at 12 V, so sustained power is modest and the ball bearing keeps acoustic output steady during all-day use.
What motherboard header or controller is required for the 4-pin connector on this 90 mm fan?
A standard 4-pin PWM header supplies both power and speed control; the fan will also run at full speed on a 3-pin header.
Will the 90x25 mm frame and 4-pin PWM control work with an older CPU cooler that uses 3-pin voltage regulation?
Yes, the 4-pin plug fits a 3-pin header and the fan will spin at maximum speed, while the 90x25 mm size matches legacy 9025 mounting holes.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051841BTC
Laos