Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 90x25mm 4-pin case fan with ball bearing

Zyvpee

Zyvpee AD0912UB-A7BGL 90x25mm 4-pin case fan

SKU CH-RB11-J9YXA

A 90×25 mm ball-bearing case fan with a 4-pin PWM connector for 12 V CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

90 mm 4-pin ball-bearing fan

The Zyvpee AD0912UB-A7BGL is a 90 by 25 mm case fan built for compact CPU coolers and tight chassis. It runs on 12 V at 0.45 A through a standard 4-pin PWM connector, so the motherboard can regulate speed automatically. The black, non-LED frame keeps the look neutral for any build.

Sustained airflow with ball bearing

A ball bearing handles continuous rotation with less friction wear than sleeve alternatives, keeping noise and vibration stable over long sessions. The 4-wire control lets the curve ramp up only when thermals demand it, so the fan stays quieter at idle while still moving air under load. No lighting means zero extra electrical draw.

Straightforward 4-pin mounting

Four corner screw holes match the 90 mm standard, and the keyed 4-pin plug prevents reversed insertion. The only common snag is cable reach in larger towers; an extension may be needed if the header sits far from the mount. Verify the 90 mm hole pattern before ordering.

Punti di forza

  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

Caratteristiche tecniche

Brand3ccooler.com
SeriesAD0912UB-A7BGL
ModelAD0912UB-A7BGL
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

Domande su questo articolo

How much heat and noise does the 12 V 0.45 A ball-bearing fan produce when running continuously?

The fan draws 0.45 A at 12 V, so sustained power is modest and the ball bearing keeps acoustic output steady during all-day use.

What motherboard header or controller is required for the 4-pin connector on this 90 mm fan?

A standard 4-pin PWM header supplies both power and speed control; the fan will also run at full speed on a 3-pin header.

Will the 90x25 mm frame and 4-pin PWM control work with an older CPU cooler that uses 3-pin voltage regulation?

Yes, the 4-pin plug fits a 3-pin header and the fan will spin at maximum speed, while the 90x25 mm size matches legacy 9025 mounting holes.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.