저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Zyvpee

Zyvpee AD0912UB-A7BGL 90x25mm 4-pin case fan

SKU CH-RB11-J9YXA

A 90×25 mm ball-bearing case fan with a 4-pin PWM connector for 12 V CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

90 mm 4-pin ball-bearing fan

The Zyvpee AD0912UB-A7BGL is a 90 by 25 mm case fan built for compact CPU coolers and tight chassis. It runs on 12 V at 0.45 A through a standard 4-pin PWM connector, so the motherboard can regulate speed automatically. The black, non-LED frame keeps the look neutral for any build.

Sustained airflow with ball bearing

A ball bearing handles continuous rotation with less friction wear than sleeve alternatives, keeping noise and vibration stable over long sessions. The 4-wire control lets the curve ramp up only when thermals demand it, so the fan stays quieter at idle while still moving air under load. No lighting means zero extra electrical draw.

Straightforward 4-pin mounting

Four corner screw holes match the 90 mm standard, and the keyed 4-pin plug prevents reversed insertion. The only common snag is cable reach in larger towers; an extension may be needed if the header sits far from the mount. Verify the 90 mm hole pattern before ordering.

주요 특징

  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

사양

Brand3ccooler.com
SeriesAD0912UB-A7BGL
ModelAD0912UB-A7BGL
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

이 상품에 대한 질문

How much heat and noise does the 12 V 0.45 A ball-bearing fan produce when running continuously?

The fan draws 0.45 A at 12 V, so sustained power is modest and the ball bearing keeps acoustic output steady during all-day use.

What motherboard header or controller is required for the 4-pin connector on this 90 mm fan?

A standard 4-pin PWM header supplies both power and speed control; the fan will also run at full speed on a 3-pin header.

Will the 90x25 mm frame and 4-pin PWM control work with an older CPU cooler that uses 3-pin voltage regulation?

Yes, the 4-pin plug fits a 3-pin header and the fan will spin at maximum speed, while the 90x25 mm size matches legacy 9025 mounting holes.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.