暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 90x25mm 4-pin case fan with ball bearing

Zyvpee

Zyvpee AD0912UB-A7BGL 90x25mm 4-pin case fan

SKU CH-RB11-J9YXA

A 90×25 mm ball-bearing case fan with a 4-pin PWM connector for 12 V CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

90 mm 4-pin ball-bearing fan

The Zyvpee AD0912UB-A7BGL is a 90 by 25 mm case fan built for compact CPU coolers and tight chassis. It runs on 12 V at 0.45 A through a standard 4-pin PWM connector, so the motherboard can regulate speed automatically. The black, non-LED frame keeps the look neutral for any build.

Sustained airflow with ball bearing

A ball bearing handles continuous rotation with less friction wear than sleeve alternatives, keeping noise and vibration stable over long sessions. The 4-wire control lets the curve ramp up only when thermals demand it, so the fan stays quieter at idle while still moving air under load. No lighting means zero extra electrical draw.

Straightforward 4-pin mounting

Four corner screw holes match the 90 mm standard, and the keyed 4-pin plug prevents reversed insertion. The only common snag is cable reach in larger towers; an extension may be needed if the header sits far from the mount. Verify the 90 mm hole pattern before ordering.

特長

  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

仕様

Brand3ccooler.com
SeriesAD0912UB-A7BGL
ModelAD0912UB-A7BGL
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

この商品に関する質問

How much heat and noise does the 12 V 0.45 A ball-bearing fan produce when running continuously?

The fan draws 0.45 A at 12 V, so sustained power is modest and the ball bearing keeps acoustic output steady during all-day use.

What motherboard header or controller is required for the 4-pin connector on this 90 mm fan?

A standard 4-pin PWM header supplies both power and speed control; the fan will also run at full speed on a 3-pin header.

Will the 90x25 mm frame and 4-pin PWM control work with an older CPU cooler that uses 3-pin voltage regulation?

Yes, the 4-pin plug fits a 3-pin header and the fan will spin at maximum speed, while the 90x25 mm size matches legacy 9025 mounting holes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。