我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 90x25mm 4-pin case fan with ball bearing

Zyvpee

Zyvpee AD0912UB-A7BGL 90x25mm 4-pin case fan

SKU CH-RB11-J9YXA

A 90×25 mm ball-bearing case fan with a 4-pin PWM connector for 12 V CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

90 mm 4-pin ball-bearing fan

The Zyvpee AD0912UB-A7BGL is a 90 by 25 mm case fan built for compact CPU coolers and tight chassis. It runs on 12 V at 0.45 A through a standard 4-pin PWM connector, so the motherboard can regulate speed automatically. The black, non-LED frame keeps the look neutral for any build.

Sustained airflow with ball bearing

A ball bearing handles continuous rotation with less friction wear than sleeve alternatives, keeping noise and vibration stable over long sessions. The 4-wire control lets the curve ramp up only when thermals demand it, so the fan stays quieter at idle while still moving air under load. No lighting means zero extra electrical draw.

Straightforward 4-pin mounting

Four corner screw holes match the 90 mm standard, and the keyed 4-pin plug prevents reversed insertion. The only common snag is cable reach in larger towers; an extension may be needed if the header sits far from the mount. Verify the 90 mm hole pattern before ordering.

商品特色

  • 12 V 0.45 A 4-pin PWM control for precise speed adjustment
  • 90 mm x 25 mm compact frame fits tight case layouts
  • Ball bearing design extends operating lifespan
  • Non-LED black finish keeps builds clean and professional
  • 4-wire connector enables motherboard fan curve management

商品規格

Brand3ccooler.com
SeriesAD0912UB-A7BGL
ModelAD0912UB-A7BGL
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

商品問答

How much heat and noise does the 12 V 0.45 A ball-bearing fan produce when running continuously?

The fan draws 0.45 A at 12 V, so sustained power is modest and the ball bearing keeps acoustic output steady during all-day use.

What motherboard header or controller is required for the 4-pin connector on this 90 mm fan?

A standard 4-pin PWM header supplies both power and speed control; the fan will also run at full speed on a 3-pin header.

Will the 90x25 mm frame and 4-pin PWM control work with an older CPU cooler that uses 3-pin voltage regulation?

Yes, the 4-pin plug fits a 3-pin header and the fan will spin at maximum speed, while the 90x25 mm size matches legacy 9025 mounting holes.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。