Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with two copper RJ45 ports and silver PCIe x4 edge connector

10Gtek X550-T2(Intel-1pc) 10Gb PCIe x4 dual RJ45 network card

SKU CH-RK8Q-VBS3D

Dual RJ45 10 GbE NIC with Intel X550-AT2 controller, PCIe 3.0 x4, low-profile bracket included

  • StandardsEthernet
  • Speed10 gigabytes_per_second
  • ConnectorsEthernet
  • Interfacepci_x_4
  • BUSpci_x_4
  • FeaturesServer, Desktop
  • 10 GbE throughput from Intel X550-AT2 controller
  • Dual RJ45 ports support 100M through 10G speeds
  • PCIe 3.0 x4 interface fits x4 x8 x16 slots
  • Low-profile bracket included for small-form-factor servers
  • Typical power draw 11.2 W maximum 13 W

10Gtek dual-port 10 GbE NIC

This PCIe x4 network card uses an Intel X550-AT2 controller to provide two copper RJ45 ports. It targets servers and desktops that need 10 GbE connectivity over twisted-pair cabling. The adapter ships with both a standard and a low-profile bracket for flexible installation.

PCIe 3.0 x4 lane and speed negotiation

The card operates on a PCI Express 3.0 x4 interface (8.0 GT/s) and is backward compatible with 2.0 and 1.1 slots. It supports 100M, 1G, 2.5G, 5G and 10G link speeds, though 2.5G and 5G may require manual configuration if auto-negotiation fails. Hot-swap is not supported.

No firmware updates and OS limits

The Intel X550-AT2 controller on this board does not accept firmware updates. Compatibility includes Windows Server 2008 and 2012, Linux, FreeBSD 9 and 10, UEFI 2.1 and 2.3, and VMware ESXi 5.1 and 5.5 with limited functionality. It is not compatible with OPNsense v25.7.3 based on FreeBSD 14.3.

Kohokohdat

  • 10 GbE throughput from Intel X550-AT2 controller
  • Dual RJ45 ports support 100M through 10G speeds
  • PCIe 3.0 x4 interface fits x4 x8 x16 slots
  • Low-profile bracket included for small-form-factor servers
  • Typical power draw 11.2 W maximum 13 W

Tekniset tiedot

Brand10Gtek
ModelX550-T2(Intel-1pc)
Part NumberX550-T2(Intel-1pc)-AU
StandardsEthernet
Speed10 gigabytes_per_second
ConnectorsEthernet
Interfacepci_x_4
BUSpci_x_4
FeaturesServer, Desktop
Dimensions5.4 in x 7.5 in x 0.4 in
Weight0.2 kilograms

Kysymyksiä tästä tuotteesta

Should I pick the dual-RJ45 version or a single-port alternative?

This card provides two RJ45 ports supporting 100M, 1G, 2.5G, 5G and 10G speeds, so one adapter covers both uplinks and server links without needing a second slot.

What does the 10GbE rating deliver inside an actual server?

The Intel X550-AT2 controller drives both ports at line-rate 10GbE with 15.5KB jumbo frames, TCP/IP checksum offload, VMDq virtualisation queues and typical power draw of 11.2W.

Does the PCIe 3.0 x4 interface limit throughput in a PCIe 2.0 slot?

The card runs at PCIe 3.0 8.0GT/s x4 but is compatible with 2.0 and 1.1 slots; in a 2.0 x4 slot the link caps at 5GT/s, still above dual 10GbE wire speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.