A-Tech 128GB DDR4 2933 ECC RDIMM 2S2Rx4 3DS Server RAM
- 128GB
- DDR4 2933 (PC4 2340…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 128 GB DDR4 3200 ECC load-reduced DIMM for expanding server or workstation memory capacity
Capacity 128GB
This 128 GB A-Tech module runs at DDR4 3200 with ECC and Load Reduced signalling. It uses a 288-pin DIMM form factor, operates at 1.20 V, and carries a CL22 latency rating. The quad-rank 4Rx4 organisation is built for high-density server and workstation platforms.
It fits systems that explicitly support DDR4 Load Reduced DIMMs with 4Rx4 ranking. Desktop and laptop boards cannot accept this module, and standard registered DIMM slots will not work with the LRDIMM protocol. Buyers who need non-ECC memory or a different rank configuration must choose another part.
Only motherboards qualified for DDR4 4Rx4 LRDIMM modules can use this stick. Verify the platform’s memory qualification list before ordering; an incompatible slot will not post with this module installed.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 4Rx4 PC4-3200AA-L |
| Part Number | NE-SS-0716 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 / 4DRx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 when installed in a server that supports that speed.
It requires a 288-pin DDR4 DIMM socket; the module has no heat spreader, so standard server DIMM clearance applies.
Power down the server, open the chassis, align the notch on the 288-pin edge connector, press firmly until both retention clips lock, then consult the system manual for correct channel population order for quad-rank modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?