A-Tech 128GB DDR4 2666 ECC RDIMM 2S4Rx4 3DS server RAM
- 128GB
- DDR4 2666 (PC4 2130…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
128 GB DDR4 2933 ECC LRDIMM module with 2S4Rx4 octal-rank 3DS chips, CL21 latency and 1.2 V operation
Capacity 128GB
This single 128GB module is built for DDR4 servers and workstations that require ECC load-reduced memory. It will not work in desktop or laptop systems. The octal-rank 3DS design lets a single DIMM deliver very high capacity for memory-intensive server workloads.
The load-reduced architecture reduces electrical loading on the memory bus, helping the module maintain stability during continuous server workloads. ECC corrects single-bit errors in real time, protecting data integrity across long-running tasks. CL21 latency at 2933 MHz supports consistent throughput under sustained demand.
Installation follows standard 288-pin DDR4 DIMM seating, but the system must explicitly support 128GB ECC LRDIMM modules with 2S4Rx4 3DS organisation. Compatibility fails when the platform does not qualify this rank and density combination. Consult the system manual for correct channel population rules before fitting the module.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 2S4Rx4 PC4-2933Y-L |
| Part Number | AT128G1D4D2933LO4N12V |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on server workload and memory controller utilisation, but the low-voltage design helps limit heat output in dense configurations.
Your server must support DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation. Consult the system manual for qualified vendor lists, maximum capacity per slot and required channel population order.
Mixing Load Reduced and standard Registered DIMMs is not supported. All populated slots must use identical LRDIMM rank structure and speed; otherwise the memory controller will disable the mismatched channels.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?