Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L ECC RDIMM module with black chips, 16GB 1066MHz 1.35V

A-Tech

A-Tech 16GB DDR3L 1066 ECC RDIMM 4Rx4 1.35V Server Memory

SKU CH-F8N1-M6NGF

16 GB DDR3L 1066 ECC registered DIMM with 4Rx4 organisation for compatible servers

  • Capacity16GB
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3L 1066MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for maximum uptime
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT72KSZS2G72PZ-1G1 modules

16 GB DDR3L 1066 ECC RDIMM

This 16 GB DDR3L module runs at 1066 MHz (PC3L-8500) with CL7 latency and 1.35 V operation. It uses a 4Rx4 registered DIMM layout with on-board ECC for data integrity. The 240-pin form factor fits compatible server and workstation platforms that require registered memory.

Sustained load behaviour

Registered buffering and ECC circuitry maintain signal quality and error correction during continuous multi-threaded workloads. The low-voltage DDR3L design reduces power draw per module compared to standard DDR3 at the same frequency. Major-brand chips are tested to deliver stable throughput over extended duty cycles in memory-intensive server roles.

Replaces Micron MT72KSZS2G72PZ-1G1 series

This module is a compatible equivalent for Micron MT72KSZS2G72PZ-1G1 and MT72KSZS2G72PZ-1G1M1 part numbers. The upgrade is worthwhile when a system needs higher single-module density to reach larger total capacities within limited DIMM slots. Buyers who need non-registered unbuffered memory or a different voltage standard should verify platform requirements before ordering.

Kohokohdat

  • 16GB DDR3L 1066MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for maximum uptime
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT72KSZS2G72PZ-1G1 modules

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much heat and power does the 1.35V DDR3L module draw when the server runs continuously?

The DDR3L 1.35V rating lowers power draw and heat compared to standard 1.5V DDR3, helping the module run cooler during all-day server workloads.

What motherboard slot and chipset support are required for this 240-pin registered ECC DIMM?

You need a server or workstation motherboard with a 240-pin DDR3 RDIMM slot and a chipset that supports registered ECC memory and 4Rx4 organisation.

Will this 1066MHz CL7 RDIMM work alongside slower or faster DDR3 modules already installed?

The module runs at DDR3-1066 CL7; the system will clock all installed DIMMs to the slowest speed and loosest timings present.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.