Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3L ECC RDIMM module with black chips, 16GB 1066MHz 1.35V

A-Tech

A-Tech 16GB DDR3L 1066 ECC RDIMM 4Rx4 1.35V Server Memory

SKU CH-F8N1-M6NGF

16 GB DDR3L 1066 ECC registered DIMM with 4Rx4 organisation for compatible servers

  • Capacity16GB
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3L 1066MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for maximum uptime
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT72KSZS2G72PZ-1G1 modules

16 GB DDR3L 1066 ECC RDIMM

This 16 GB DDR3L module runs at 1066 MHz (PC3L-8500) with CL7 latency and 1.35 V operation. It uses a 4Rx4 registered DIMM layout with on-board ECC for data integrity. The 240-pin form factor fits compatible server and workstation platforms that require registered memory.

Sustained load behaviour

Registered buffering and ECC circuitry maintain signal quality and error correction during continuous multi-threaded workloads. The low-voltage DDR3L design reduces power draw per module compared to standard DDR3 at the same frequency. Major-brand chips are tested to deliver stable throughput over extended duty cycles in memory-intensive server roles.

Replaces Micron MT72KSZS2G72PZ-1G1 series

This module is a compatible equivalent for Micron MT72KSZS2G72PZ-1G1 and MT72KSZS2G72PZ-1G1M1 part numbers. The upgrade is worthwhile when a system needs higher single-module density to reach larger total capacities within limited DIMM slots. Buyers who need non-registered unbuffered memory or a different voltage standard should verify platform requirements before ordering.

Pluspunten

  • 16GB DDR3L 1066MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for maximum uptime
  • 35V low voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT72KSZS2G72PZ-1G1 modules

Specificaties

BrandA-Tech
Capacity16GB
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How much heat and power does the 1.35V DDR3L module draw when the server runs continuously?

The DDR3L 1.35V rating lowers power draw and heat compared to standard 1.5V DDR3, helping the module run cooler during all-day server workloads.

What motherboard slot and chipset support are required for this 240-pin registered ECC DIMM?

You need a server or workstation motherboard with a 240-pin DDR3 RDIMM slot and a chipset that supports registered ECC memory and 4Rx4 organisation.

Will this 1066MHz CL7 RDIMM work alongside slower or faster DDR3 modules already installed?

The module runs at DDR3-1066 CL7; the system will clock all installed DIMMs to the slowest speed and loosest timings present.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.