Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black chips and silver register

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 for Hynix HMA42GL7AFR4N-TF server RAM

SKU CH-NGKH-V3SDT

16 GB DDR4 2133 ECC registered DIMM with 2Rx4 organisation and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity adds headroom for virtualisation workloads
  • DDR4 2133 MHz speed matches PC4-17000 server specs
  • ECC registered design corrects single-bit errors automatically
  • CL15 latency at 1.2 V keeps power draw low
  • 288-pin 2Rx4 layout fits standard DDR4 DIMM slots

16GB DDR4 ECC RDIMM for servers

This 16GB DDR4 2133MHz registered DIMM delivers error-correcting memory for server and workstation platforms. The 2Rx4 organisation and CL15 latency suit workloads that demand data integrity over raw bandwidth. It replaces the listed Hynix part numbers in compatible systems.

Standard voltage and registered design

Operating at 1.20V, the module runs at the normal DDR4 voltage without extra power overhead. Registered buffering reduces electrical load on the memory controller, helping stability in populated slots. No special cooling or raised fan speeds are required for typical server chassis airflow.

Major-brand chips and lifetime support

Built with major-brand components, the stick undergoes quality-assurance testing before shipment. A-Tech backs the module with a lifetime warranty and provides US-based technical support for compatibility checks and troubleshooting. Verify your system's supported memory specifications before ordering.

Kohokohdat

  • 16 GB capacity adds headroom for virtualisation workloads
  • DDR4 2133 MHz speed matches PC4-17000 server specs
  • ECC registered design corrects single-bit errors automatically
  • CL15 latency at 1.2 V keeps power draw low
  • 288-pin 2Rx4 layout fits standard DDR4 DIMM slots

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR4 ECC RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are detected at 2133 MHz CL15.

What maintenance or replacement will this 16GB 2Rx4 module need over its service life?

No scheduled maintenance is required; keep air paths clean so the 1.20V modules stay cool, and replace only if memory diagnostics report correctable ECC errors rising or a hard failure occurs.

What limit appears first when this CL15 2133 MHz RDIMM runs sustained workloads?

The 2133 MHz PC4-17000 bandwidth ceiling is reached before thermal throttling at 1.20V, so throughput tops out at the rated transfer rate during continuous heavy use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.