Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 for Hynix HMA42GL7AFR4N-TF server RAM

SKU CH-NGKH-V3SDT

16 GB DDR4 2133 ECC registered DIMM with 2Rx4 organisation and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity adds headroom for virtualisation workloads
  • DDR4 2133 MHz speed matches PC4-17000 server specs
  • ECC registered design corrects single-bit errors automatically
  • CL15 latency at 1.2 V keeps power draw low
  • 288-pin 2Rx4 layout fits standard DDR4 DIMM slots

16GB DDR4 ECC RDIMM for servers

This 16GB DDR4 2133MHz registered DIMM delivers error-correcting memory for server and workstation platforms. The 2Rx4 organisation and CL15 latency suit workloads that demand data integrity over raw bandwidth. It replaces the listed Hynix part numbers in compatible systems.

Standard voltage and registered design

Operating at 1.20V, the module runs at the normal DDR4 voltage without extra power overhead. Registered buffering reduces electrical load on the memory controller, helping stability in populated slots. No special cooling or raised fan speeds are required for typical server chassis airflow.

Major-brand chips and lifetime support

Built with major-brand components, the stick undergoes quality-assurance testing before shipment. A-Tech backs the module with a lifetime warranty and provides US-based technical support for compatibility checks and troubleshooting. Verify your system's supported memory specifications before ordering.

Přednosti

  • 16 GB capacity adds headroom for virtualisation workloads
  • DDR4 2133 MHz speed matches PC4-17000 server specs
  • ECC registered design corrects single-bit errors automatically
  • CL15 latency at 1.2 V keeps power draw low
  • 288-pin 2Rx4 layout fits standard DDR4 DIMM slots

Specifikace

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How do I install this 288-pin DDR4 ECC RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are detected at 2133 MHz CL15.

What maintenance or replacement will this 16GB 2Rx4 module need over its service life?

No scheduled maintenance is required; keep air paths clean so the 1.20V modules stay cool, and replace only if memory diagnostics report correctable ECC errors rising or a hard failure occurs.

What limit appears first when this CL15 2133 MHz RDIMM runs sustained workloads?

The 2133 MHz PC4-17000 bandwidth ceiling is reached before thermal throttling at 1.20V, so throughput tops out at the rated transfer rate during continuous heavy use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.