BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16 GB DDR4 SODIMM running at 3200 MHz with CL22 latency for laptop upgrades
This 16 GB A-Tech module is a 260-pin DDR4 SO-DIMM rated at 3200 MHz with CL22 latency and 1.2 V operation. It is built as a direct replacement for Dell part numbers AA937596 and SNPWTHG4C/16G and uses unbuffered non-ECC chips. The stick is sold new and tested for reliable laptop upgrades.
The single specification that decides fit is the exact Dell part-number match: AA937596 and SNPWTHG4C/16G. Your system must accept a 260-pin DDR4 SO-DIMM running at 3200 MHz PC4-25600 with CL22 timing at 1.2 V. Verify those numbers in your service manual before ordering.
This module suits anyone upgrading a supported Dell laptop, notebook or all-in-one that lists the two Dell part numbers above. It is not for systems that require ECC or registered memory, nor for machines limited to lower speeds, different pin counts or other DDR generations. Buyers who need a second stick for dual-channel should confirm slot availability first.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module runs at up to 3200 MHz, delivering PC4-25600 bandwidth; the system will clock it down automatically if the platform only supports a lower DDR4 speed.
The 260-pin SO-DIMM form factor fits only laptop, notebook or all-in-one slots that accept DDR4 unbuffered non-ECC modules.
It requires a standard 260-pin DDR4 SO-DIMM slot and operates at the DDR4 standard voltage of 1.2 V.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?