BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
16 GB DDR4 SODIMM running at 3200 MHz with CL22 latency for laptop upgrades
This 16 GB A-Tech module is a 260-pin DDR4 SO-DIMM rated at 3200 MHz with CL22 latency and 1.2 V operation. It is built as a direct replacement for Dell part numbers AA937596 and SNPWTHG4C/16G and uses unbuffered non-ECC chips. The stick is sold new and tested for reliable laptop upgrades.
The single specification that decides fit is the exact Dell part-number match: AA937596 and SNPWTHG4C/16G. Your system must accept a 260-pin DDR4 SO-DIMM running at 3200 MHz PC4-25600 with CL22 timing at 1.2 V. Verify those numbers in your service manual before ordering.
This module suits anyone upgrading a supported Dell laptop, notebook or all-in-one that lists the two Dell part numbers above. It is not for systems that require ECC or registered memory, nor for machines limited to lower speeds, different pin counts or other DDR generations. Buyers who need a second stick for dual-channel should confirm slot availability first.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module runs at up to 3200 MHz, delivering PC4-25600 bandwidth; the system will clock it down automatically if the platform only supports a lower DDR4 speed.
The 260-pin SO-DIMM form factor fits only laptop, notebook or all-in-one slots that accept DDR4 unbuffered non-ECC modules.
It requires a standard 260-pin DDR4 SO-DIMM slot and operates at the DDR4 standard voltage of 1.2 V.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม