A-Tech 32GB (2x16GB) DDR4 2133 ECC RDIMM 2Rx8 server RAM
- 32GB (2 x 16GB)
- 288-Pin DDR4 SDRAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
Two 16 GB DDR4 2933 ECC registered DIMMs, single rank x4, for servers and workstations
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 2933 ECC registered DIMMs built for servers and workstations. Each module runs at 1.2V with CL21 latency and a single-rank x4 organisation. The 288-pin form factor fits DDR4 RDIMM slots only and is not compatible with desktop or laptop platforms.
Registered ECC modules operate at the standard 1.2V DDR4 voltage, keeping power draw low in typical server workloads. Passive cooling via system airflow is sufficient; no active fan or additional heatsink is required on the modules themselves. Acoustic impact is negligible inside a properly ventilated chassis.
This kit replaces lower-capacity or non-ECC DDR4 RDIMMs in dual-channel server boards that support 2933 MHz registered memory. The jump is worth it when workloads demand larger error-corrected memory pools for virtualisation, databases or compute clusters. Systems limited to unbuffered DIMMs or non-ECC operation cannot use these modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 1Rx4 PC4-2933Y-R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down, open the chassis, align each module's notch with the 288-pin DDR4 slot key, press firmly until both retention clips click, then populate identical channels per the motherboard manual — mixing ranks across channels is the common error.
No scheduled maintenance is required; ECC corrects single-bit errors on the fly, so replacement only occurs if a module fails or a future platform demands a different DDR generation or higher speed than 2933 MT/s.
The JEDEC 2933 MT/s data rate and CL21 latency set the throughput ceiling; registered buffering adds one cycle, so memory bandwidth saturates before the 1.2 V supply or thermal envelope becomes a constraint.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?