A-Tech 32GB (2x16GB) DDR4 2133 ECC RDIMM 2Rx8 server RAM
- 32GB (2 x 16GB)
- 288-Pin DDR4 SDRAM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
Two 16 GB DDR4 2933 ECC registered DIMMs, single rank x4, for servers and workstations
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 2933 ECC registered DIMMs built for servers and workstations. Each module runs at 1.2V with CL21 latency and a single-rank x4 organisation. The 288-pin form factor fits DDR4 RDIMM slots only and is not compatible with desktop or laptop platforms.
Registered ECC modules operate at the standard 1.2V DDR4 voltage, keeping power draw low in typical server workloads. Passive cooling via system airflow is sufficient; no active fan or additional heatsink is required on the modules themselves. Acoustic impact is negligible inside a properly ventilated chassis.
This kit replaces lower-capacity or non-ECC DDR4 RDIMMs in dual-channel server boards that support 2933 MHz registered memory. The jump is worth it when workloads demand larger error-corrected memory pools for virtualisation, databases or compute clusters. Systems limited to unbuffered DIMMs or non-ECC operation cannot use these modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 1Rx4 PC4-2933Y-R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Power down, open the chassis, align each module's notch with the 288-pin DDR4 slot key, press firmly until both retention clips click, then populate identical channels per the motherboard manual — mixing ranks across channels is the common error.
No scheduled maintenance is required; ECC corrects single-bit errors on the fly, so replacement only occurs if a module fails or a future platform demands a different DDR generation or higher speed than 2933 MT/s.
The JEDEC 2933 MT/s data rate and CL21 latency set the throughput ceiling; registered buffering adds one cycle, so memory bandwidth saturates before the 1.2 V supply or thermal envelope becomes a constraint.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?