Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 RDIMM sticks, 288-pin, black chips, silver edge connectors

A-Tech

A-Tech 32GB (2x16GB) DDR4 3200 ECC RDIMM 2Rx8 CL22 1.2V Server RAM

SKU CH-438E-XWMT7

A 32 GB dual-channel kit of two 16 GB DDR4 3200 registered ECC DIMMs with CL22 latency and 1.2 V operation for servers and workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • ECC RDIMM protects data integrity in server workloads
  • 32GB dual-channel kit (2×16GB) expands memory capacity
  • DDR4 3200 CL22 at 1.2V delivers rated speed
  • 2Rx8 registered modules fit 288-pin DDR4 slots
  • Major-brand chips tested for reliable operation

Server Memory Kit

This A-Tech kit provides 32GB of DDR4 ECC registered memory in a matched pair of 16GB modules. It is built for servers and workstations that require registered DIMMs with error correction. The kit is not compatible with desktop or laptop computers that use unbuffered memory.

Registered ECC Requirement

The modules are DDR4 3200 RDIMMs with a 2Rx8 organisation and CL22 latency at 1.2V. Your system must support DDR4 registered ECC memory in a 288-pin DIMM slot; unbuffered or non-ECC platforms will not accept these modules.

Installation Notes

Align the notch on each 288-pin module with the slot key and press firmly until the retention clips lock. Follow the motherboard manual for correct channel population order. The most common issue is installing registered ECC DIMMs into a board that only supports unbuffered memory.

Kohokohdat

  • ECC RDIMM protects data integrity in server workloads
  • 32GB dual-channel kit (2×16GB) expands memory capacity
  • DDR4 3200 CL22 at 1.2V delivers rated speed
  • 2Rx8 registered modules fit 288-pin DDR4 slots
  • Major-brand chips tested for reliable operation

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 2Rx8 PC4-3200AA-R
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 3200 MHz speed rating mean once the modules are installed in a server?

The DDR4 3200 rating sets the maximum data rate at 3200 MT/s, so the memory bus can transfer up to 25600 MB/s per module when the platform runs at that speed.

How does the registered ECC RDIMM interface affect what the system can actually use?

The RDIMM places a register between the DRAM and the memory controller, which reduces electrical load and lets the server support higher capacities, while ECC corrects single-bit errors on the fly.

What physical slot and clearance do the 288-pin DIMMs need to fit in a chassis?

Each module uses a standard 288-pin DDR4 DIMM slot and requires enough vertical clearance for a full-height registered DIMM in the server or workstation motherboard.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.