Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR4 ECC RDIMM modules in a quad-channel kit

A-Tech

A-Tech 32GB (4x8GB) DDR4 2666 ECC RDIMM 2Rx8 Server RAM

SKU CH-YR76-YV49M

A 32 GB quad-channel DDR4 2666 MHz ECC registered DIMM kit with CL19 latency and 1.2 V operation for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity in a matched quad-channel kit
  • ECC registered design detects and corrects single-bit errors
  • 2666 MHz DDR4 speed rated at PC4-21300 bandwidth
  • 2 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR4 server slots

32GB Quad-Channel ECC RDIMM Kit

This A-Tech kit provides 32GB of DDR4 server memory across four 8GB registered DIMMs. It is built for servers and workstations that require ECC error correction and registered signal buffering. The modules are not compatible with standard desktop or laptop platforms. Buyers who need non-ECC unbuffered memory for consumer boards cannot use this product.

Sustained Workload Stability

Each module runs at 2666 MHz with a CAS latency of 19 and operates at the standard 1.20V DDR4 voltage. The dual-rank 2Rx8 organisation and registered design help maintain data integrity during continuous multi-threaded workloads. ECC circuitry corrects single-bit errors on the fly, reducing the risk of silent data corruption under prolonged heavy use.

Straightforward Registered DIMM Installation

The 288-pin DIMMs seat in standard DDR4 RDIMM slots following the motherboard’s quad-channel population rules. Because the kit is registered and ECC, the system BIOS must support registered memory; otherwise the modules will not initialise. Mixing these sticks with unbuffered or non-ECC DIMMs will prevent the server from posting.

Kohokohdat

  • 32 GB total capacity in a matched quad-channel kit
  • ECC registered design detects and corrects single-bit errors
  • 2666 MHz DDR4 speed rated at PC4-21300 bandwidth
  • 2 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR4 server slots

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC4-2666V-R
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.20V DDR4 2666 kit draw under continuous load?

The modules operate at the standard DDR4 voltage of 1.20V, which keeps power draw low during all-day server workloads.

What motherboard feature is required to use these registered ECC DIMMs?

The system must support DDR4 RDIMM memory with ECC and registered buffering; desktop or laptop boards will not work.

Will the CL19 2Rx8 modules run alongside older DDR4 sticks I want to keep?

Mixing ranks, speeds or latencies can prevent the system from booting; for stable operation use identical modules in each channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.