Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 32GB (4x8GB) DDR4 2666 ECC RDIMM 2Rx8 Server RAM

SKU CH-YR76-YV49M

A 32 GB quad-channel DDR4 2666 MHz ECC registered DIMM kit with CL19 latency and 1.2 V operation for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity in a matched quad-channel kit
  • ECC registered design detects and corrects single-bit errors
  • 2666 MHz DDR4 speed rated at PC4-21300 bandwidth
  • 2 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR4 server slots

32GB Quad-Channel ECC RDIMM Kit

This A-Tech kit provides 32GB of DDR4 server memory across four 8GB registered DIMMs. It is built for servers and workstations that require ECC error correction and registered signal buffering. The modules are not compatible with standard desktop or laptop platforms. Buyers who need non-ECC unbuffered memory for consumer boards cannot use this product.

Sustained Workload Stability

Each module runs at 2666 MHz with a CAS latency of 19 and operates at the standard 1.20V DDR4 voltage. The dual-rank 2Rx8 organisation and registered design help maintain data integrity during continuous multi-threaded workloads. ECC circuitry corrects single-bit errors on the fly, reducing the risk of silent data corruption under prolonged heavy use.

Straightforward Registered DIMM Installation

The 288-pin DIMMs seat in standard DDR4 RDIMM slots following the motherboard’s quad-channel population rules. Because the kit is registered and ECC, the system BIOS must support registered memory; otherwise the modules will not initialise. Mixing these sticks with unbuffered or non-ECC DIMMs will prevent the server from posting.

Přednosti

  • 32 GB total capacity in a matched quad-channel kit
  • ECC registered design detects and corrects single-bit errors
  • 2666 MHz DDR4 speed rated at PC4-21300 bandwidth
  • 2 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR4 server slots

Specifikace

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC4-2666V-R
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much power does the 1.20V DDR4 2666 kit draw under continuous load?

The modules operate at the standard DDR4 voltage of 1.20V, which keeps power draw low during all-day server workloads.

What motherboard feature is required to use these registered ECC DIMMs?

The system must support DDR4 RDIMM memory with ECC and registered buffering; desktop or laptop boards will not work.

Will the CL19 2Rx8 modules run alongside older DDR4 sticks I want to keep?

Mixing ranks, speeds or latencies can prevent the system from booting; for stable operation use identical modules in each channel.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.