Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge contacts

A-Tech

A-Tech 32GB DDR4 2933MHz ECC Registered RDIMM 2Rx4 Supermicro Certified

SKU CH-NHY6-6DNQW

A 32 GB DDR4 2933 MHz registered ECC RDIMM with dual-rank Micron chips, validated for Supermicro servers

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC Registered design prevents data corruption
  • Supermicro certified for guaranteed compatibility
  • Micron chipset ensures reliable operation

Certified Server Memory

This 32GB DDR4 2933MHz ECC Registered RDIMM is built for Supermicro platforms that require registered memory with error correction. The module uses Micron chips in a 2Rx4 dual-rank layout and runs at the standard 1.20V DDR4 voltage. It suits administrators upgrading compatible Supermicro servers or workstations that specify PC4-23400 registered DIMMs.

Thermals and Power

Operating at 1.20V, the module draws the standard DDR4 voltage without elevated power demands. The registered buffer and ECC logic add minimal overhead, so thermals remain comparable to other registered DDR4 DIMMs under typical server workloads. No additional cooling beyond normal chassis airflow is required for this 288-pin RDIMM.

What the Certification Changes

Supermicro certification means the MEM-DR432L-CL02-ER29 part number has been validated for compatibility with qualified Supermicro systems, reducing the risk of POST failures or memory errors. The Micron MTA36ASF4G72PZ-2G9J3 base module undergoes A-Tech quality testing before shipment. Buyers who need unbuffered UDIMMs or non-ECC memory for consumer boards cannot use this registered ECC module.

Kohokohdat

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC Registered design prevents data corruption
  • Supermicro certified for guaranteed compatibility
  • Micron chipset ensures reliable operation

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR432L-CL02-ER29
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR432L-CL02-ER29 (MTA36ASF4G72PZ-2G9J3)

Kysymyksiä tästä tuotteesta

How do I install this 288-pin RDIMM in a Supermicro server and which step is often missed?

Align the notch on the 288-pin RDIMM with the slot key, press firmly until both side clips lock, then verify in BIOS that the 2Rx4 module registers at DDR4 2933 with ECC enabled — the step often missed is confirming the registered ECC mode in firmware.

What maintenance or replacement will this Micron-based 32GB DDR4 module need over its service life?

No scheduled maintenance is required; the module either passes POST or it does not, so replacement only occurs if memory errors appear or capacity must be increased beyond 32GB.

What limit appears first when this CL21 1.20V registered DIMM runs sustained workloads?

The JEDEC DDR4 2933 transfer rate and CL21 latency ceiling are reached before thermal or voltage limits, so throughput caps at the rated PC4-23400 bandwidth.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.