Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge contacts

A-Tech

A-Tech 32GB DDR4 2933MHz ECC Registered RDIMM 2Rx4 Supermicro Certified

SKU CH-NHY6-6DNQW

A 32 GB DDR4 2933 MHz registered ECC RDIMM with dual-rank Micron chips, validated for Supermicro servers

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC Registered design prevents data corruption
  • Supermicro certified for guaranteed compatibility
  • Micron chipset ensures reliable operation

Certified Server Memory

This 32GB DDR4 2933MHz ECC Registered RDIMM is built for Supermicro platforms that require registered memory with error correction. The module uses Micron chips in a 2Rx4 dual-rank layout and runs at the standard 1.20V DDR4 voltage. It suits administrators upgrading compatible Supermicro servers or workstations that specify PC4-23400 registered DIMMs.

Thermals and Power

Operating at 1.20V, the module draws the standard DDR4 voltage without elevated power demands. The registered buffer and ECC logic add minimal overhead, so thermals remain comparable to other registered DDR4 DIMMs under typical server workloads. No additional cooling beyond normal chassis airflow is required for this 288-pin RDIMM.

What the Certification Changes

Supermicro certification means the MEM-DR432L-CL02-ER29 part number has been validated for compatibility with qualified Supermicro systems, reducing the risk of POST failures or memory errors. The Micron MTA36ASF4G72PZ-2G9J3 base module undergoes A-Tech quality testing before shipment. Buyers who need unbuffered UDIMMs or non-ECC memory for consumer boards cannot use this registered ECC module.

Pluspunten

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC Registered design prevents data corruption
  • Supermicro certified for guaranteed compatibility
  • Micron chipset ensures reliable operation

Specificaties

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR432L-CL02-ER29
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR432L-CL02-ER29 (MTA36ASF4G72PZ-2G9J3)

Vragen over dit artikel

How do I install this 288-pin RDIMM in a Supermicro server and which step is often missed?

Align the notch on the 288-pin RDIMM with the slot key, press firmly until both side clips lock, then verify in BIOS that the 2Rx4 module registers at DDR4 2933 with ECC enabled — the step often missed is confirming the registered ECC mode in firmware.

What maintenance or replacement will this Micron-based 32GB DDR4 module need over its service life?

No scheduled maintenance is required; the module either passes POST or it does not, so replacement only occurs if memory errors appear or capacity must be increased beyond 32GB.

What limit appears first when this CL21 1.20V registered DIMM runs sustained workloads?

The JEDEC DDR4 2933 transfer rate and CL21 latency ceiling are reached before thermal or voltage limits, so throughput caps at the rated PC4-23400 bandwidth.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.