NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for IBM-Lenovo servers
This 32GB DDR4 3200MHz PC4-25600 registered DIMM delivers error-correcting code memory for server and workstation platforms. It operates at 1.20V with CL22 latency and a 2Rx8 organisation using major-brand chips. The 288-pin module is built as a direct replacement for IBM-Lenovo part numbers 02JG183, 4X77A08634, 4X77A12188 and 4ZC7A15123.
Administrators upgrading compatible IBM-Lenovo systems or other servers that require registered ECC DDR4 at 3200MHz will find this module matches the specified voltage, rank and pin count. Builders whose platforms only accept unbuffered non-ECC UDIMMs, demand a different DDR generation, or require lower or higher capacities per slot cannot use this part.
The registered buffer and ECC functionality are mandatory for the target server chipsets; a standard unbuffered DIMM will not operate in these slots. Confirm that your system Qualified Vendor List includes 2Rx8 PC4-25600 registered modules before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with a peak transfer rate of 25600 MB/s; actual bandwidth depends on the memory controller and channel configuration of the host system.
It uses the standard 288-pin DDR4 DIMM form factor and registered signalling, so it fits any server or workstation board that accepts DDR4 RDIMMs and has an open slot.
Power down, open the chassis, align the notch with the keyed slot, press firmly until both latches click, then enter the BIOS to confirm ECC is enabled and the speed is set to 3200 MT/s.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?