NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for IBM-Lenovo servers
This 32GB DDR4 3200MHz PC4-25600 registered DIMM delivers error-correcting code memory for server and workstation platforms. It operates at 1.20V with CL22 latency and a 2Rx8 organisation using major-brand chips. The 288-pin module is built as a direct replacement for IBM-Lenovo part numbers 02JG183, 4X77A08634, 4X77A12188 and 4ZC7A15123.
Administrators upgrading compatible IBM-Lenovo systems or other servers that require registered ECC DDR4 at 3200MHz will find this module matches the specified voltage, rank and pin count. Builders whose platforms only accept unbuffered non-ECC UDIMMs, demand a different DDR generation, or require lower or higher capacities per slot cannot use this part.
The registered buffer and ECC functionality are mandatory for the target server chipsets; a standard unbuffered DIMM will not operate in these slots. Confirm that your system Qualified Vendor List includes 2Rx8 PC4-25600 registered modules before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with a peak transfer rate of 25600 MB/s; actual bandwidth depends on the memory controller and channel configuration of the host system.
It uses the standard 288-pin DDR4 DIMM form factor and registered signalling, so it fits any server or workstation board that accepts DDR4 RDIMMs and has an open slot.
Power down, open the chassis, align the notch with the keyed slot, press firmly until both latches click, then enter the BIOS to confirm ECC is enabled and the speed is set to 3200 MT/s.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?