NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB DDR4 3200 MHz unbuffered DIMM running at 1.2 V with a 288-pin layout for desktop upgrades
This 32 GB DDR4 DIMM delivers a full 32 GB in one 288-pin module, removing the need to populate multiple slots for the same capacity. It targets desktop owners who want a straightforward capacity increase without rearranging existing sticks. The non-ECC unbuffered design matches standard consumer motherboards.
The module runs at the DDR4 standard 1.2 V, so it draws no extra voltage headroom from the memory controller. Its 2Rx8 organisation works with typical dual-channel boards, leaving the remaining slots free for future expansion. Compatibility is validated against the Hynix HMAA4GU6AJR8N-XN and HMAA4GU6CJR8N-XN part numbers.
Rated at 3200 MT/s (PC4-25600), the stick maintains its rated frequency under continuous multi-tasking and memory-heavy applications. Quality-assurance testing confirms stable operation during extended sessions rather than only brief benchmarks. The single-rank-per-channel layout helps keep latency consistent when the system is under prolonged load.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for DDR4 3200 at 1.2 V, so it maintains that frequency as long as the motherboard keeps the standard voltage and the system cooling handles the heat load.
Operating at the standard 1.2 V DDR4 voltage, the DIMM produces only modest heat and has no moving parts, so it adds no audible noise to a desktop that runs continuously.
You need a desktop board with a DDR4 288-pin UDIMM slot and a memory controller that supports non-ECC unbuffered modules at 1.2 V.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?