OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB DDR4 3200 MHz unbuffered DIMM running at 1.2 V with a 288-pin layout for desktop upgrades
This 32 GB DDR4 DIMM delivers a full 32 GB in one 288-pin module, removing the need to populate multiple slots for the same capacity. It targets desktop owners who want a straightforward capacity increase without rearranging existing sticks. The non-ECC unbuffered design matches standard consumer motherboards.
The module runs at the DDR4 standard 1.2 V, so it draws no extra voltage headroom from the memory controller. Its 2Rx8 organisation works with typical dual-channel boards, leaving the remaining slots free for future expansion. Compatibility is validated against the Hynix HMAA4GU6AJR8N-XN and HMAA4GU6CJR8N-XN part numbers.
Rated at 3200 MT/s (PC4-25600), the stick maintains its rated frequency under continuous multi-tasking and memory-heavy applications. Quality-assurance testing confirms stable operation during extended sessions rather than only brief benchmarks. The single-rank-per-channel layout helps keep latency consistent when the system is under prolonged load.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for DDR4 3200 at 1.2 V, so it maintains that frequency as long as the motherboard keeps the standard voltage and the system cooling handles the heat load.
Operating at the standard 1.2 V DDR4 voltage, the DIMM produces only modest heat and has no moving parts, so it adds no audible noise to a desktop that runs continuously.
You need a desktop board with a DDR4 288-pin UDIMM slot and a memory controller that supports non-ECC unbuffered modules at 1.2 V.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟