NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR5 4800 MHz ECC UDIMM module with 2Rx8 organisation and 1.10 V operation
This 32GB DDR5 4800MHz ECC UDIMM uses a 2Rx8 layout and runs at 1.10V. It is built for servers and workstations that require error-correcting memory in an unbuffered form factor. The module fits standard 288-pin DDR5 slots and replaces the Hynix HMCG88AEBEA part.
Error-correcting code detects and corrects single-bit errors during continuous operation, preventing data corruption under heavy memory loads. The 2Rx8 organisation allows the memory controller to interleave accesses across ranks, helping maintain throughput during long-running tasks. CAS latency of 40 cycles is consistent with DDR5-4800 JEDEC timing.
This module is unbuffered ECC UDIMM, so it only works in platforms that explicitly support unbuffered ECC memory. Registered or fully buffered systems cannot use it, and consumer boards without ECC support will not enable the error-correction function. Verify your motherboard or server manual lists unbuffered ECC UDIMM compatibility before purchase.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG88AEBEA |
| Model | A-Tech 32GB DDR5-4800 ECC UDIMM Server RAM Module |
| Capacity | 32GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
The module operates at the standard DDR5 voltage of 1.10V. Actual power draw depends on the platform's memory controller and workload; the module itself has no separate power rating.
You need a motherboard with a 288-pin DDR5 UDIMM slot that supports ECC unbuffered memory. Check your system manual for qualified memory lists and channel population rules.
The module is rated for DDR5 4800 (PC5-38400) at CL40. If mixed with slower DDR5, the system will clock all modules to the lowest common speed and loosest timings.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?