Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

A-Tech

A-Tech 32GB DDR5 4800MHz ECC UDIMM 2Rx8 1.10V Server Memory

SKU CH-EEFW-6W7AA

32 GB DDR5 4800 MHz ECC UDIMM module with 2Rx8 organisation and 1.10 V operation

  • Capacity32GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity expands multitasking headroom for demanding server workloads
  • DDR5 4800 MHz speed accelerates data throughput in compatible platforms
  • ECC protection detects and corrects single-bit errors to maintain data integrity
  • 10 V standard voltage reduces power draw per module
  • 2Rx8 dual-rank organisation increases memory density on a single 288-pin UDIMM

32GB DDR5 ECC UDIMM for server workloads

This 32GB DDR5 4800MHz ECC UDIMM uses a 2Rx8 layout and runs at 1.10V. It is built for servers and workstations that require error-correcting memory in an unbuffered form factor. The module fits standard 288-pin DDR5 slots and replaces the Hynix HMCG88AEBEA part.

Sustained operation with ECC integrity

Error-correcting code detects and corrects single-bit errors during continuous operation, preventing data corruption under heavy memory loads. The 2Rx8 organisation allows the memory controller to interleave accesses across ranks, helping maintain throughput during long-running tasks. CAS latency of 40 cycles is consistent with DDR5-4800 JEDEC timing.

Unbuffered ECC limits platform choice

This module is unbuffered ECC UDIMM, so it only works in platforms that explicitly support unbuffered ECC memory. Registered or fully buffered systems cannot use it, and consumer boards without ECC support will not enable the error-correction function. Verify your motherboard or server manual lists unbuffered ECC UDIMM compatibility before purchase.

Points forts

  • 32 GB capacity expands multitasking headroom for demanding server workloads
  • DDR5 4800 MHz speed accelerates data throughput in compatible platforms
  • ECC protection detects and corrects single-bit errors to maintain data integrity
  • 10 V standard voltage reduces power draw per module
  • 2Rx8 dual-rank organisation increases memory density on a single 288-pin UDIMM

Caractéristiques

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG88AEBEA
ModelA-Tech 32GB DDR5-4800 ECC UDIMM Server RAM Module
Capacity32GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Questions sur cet article

How much power does the 1.10V DDR5 module draw when the server runs continuously?

The module operates at the standard DDR5 voltage of 1.10V. Actual power draw depends on the platform's memory controller and workload; the module itself has no separate power rating.

What motherboard slot and chipset support are required for this 288-pin DDR5 ECC UDIMM?

You need a motherboard with a 288-pin DDR5 UDIMM slot that supports ECC unbuffered memory. Check your system manual for qualified memory lists and channel population rules.

Will this 4800MHz 2Rx8 module run stably alongside slower DDR5 sticks I already have?

The module is rated for DDR5 4800 (PC5-38400) at CL40. If mixed with slower DDR5, the system will clock all modules to the lowest common speed and loosest timings.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.