BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
4GB DDR3 1333MHz SODIMM laptop memory upgrade compatible with Dell A3520621, A3944744, A4501458
This A-Tech module provides 4GB of DDR3 memory at 1333MHz (PC3-10600) in a 204-pin SODIMM form factor. It operates at the standard 1.5V with CL9 latency and uses unbuffered, non-ECC architecture. The stick is built with major-brand chips and serves as a direct replacement for Dell part numbers A3520621, A3944744 and A4501458.
This module fits laptops and all-in-one systems that accept DDR3 SODIMMs at 1.5V and have a free 204-pin slot. It will not work in machines that require ECC or registered memory, nor in platforms limited to lower voltages such as 1.35V. Systems needing more than 4GB per slot or a different DDR generation must use other memory.
The decisive specification is the 1333MHz DDR3 speed grade, labelled PC3-10600. Your system’s memory controller must support this exact rate; otherwise the module will not function correctly. Verify the supported memory specifications of your laptop before ordering to ensure compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 204-pin SO-DIMM form factor. Check your laptop's service manual to confirm it accepts DDR3 SO-DIMM modules before installing.
Yes, it runs at DDR3 1333 (PC3-10600) with CL9 timing and 1.5 V, matching the standard JEDEC profile for that speed grade.
Open Task Manager or a system information tool and check the reported memory speed; it should show 1333 MHz for this module.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?