BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4GB DDR3 1333MHz SODIMM laptop memory upgrade compatible with Dell A3520621, A3944744, A4501458
This A-Tech module provides 4GB of DDR3 memory at 1333MHz (PC3-10600) in a 204-pin SODIMM form factor. It operates at the standard 1.5V with CL9 latency and uses unbuffered, non-ECC architecture. The stick is built with major-brand chips and serves as a direct replacement for Dell part numbers A3520621, A3944744 and A4501458.
This module fits laptops and all-in-one systems that accept DDR3 SODIMMs at 1.5V and have a free 204-pin slot. It will not work in machines that require ECC or registered memory, nor in platforms limited to lower voltages such as 1.35V. Systems needing more than 4GB per slot or a different DDR generation must use other memory.
The decisive specification is the 1333MHz DDR3 speed grade, labelled PC3-10600. Your system’s memory controller must support this exact rate; otherwise the module will not function correctly. Verify the supported memory specifications of your laptop before ordering to ensure compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 204-pin SO-DIMM form factor. Check your laptop's service manual to confirm it accepts DDR3 SO-DIMM modules before installing.
Yes, it runs at DDR3 1333 (PC3-10600) with CL9 timing and 1.5 V, matching the standard JEDEC profile for that speed grade.
Open Task Manager or a system information tool and check the reported memory speed; it should show 1333 MHz for this module.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟