Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 4GB DDR3L 1333MHz 204-Pin SODIMM Laptop RAM

SKU CH-JFBM-K7A6D

A 4 GB DDR3L SODIMM running at 1333 MHz with CL9 latency and 1.35 V low voltage for laptop upgrades

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCNo
  • Boosts system speed with 1333 MHz DDR3L performance
  • Low 1.35 V DDR3L voltage cuts power draw
  • 204-pin SO-DIMM fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility
  • Replaces Micron MT16KTF51264HZ-1G4 series modules directly

Product Identity

This A-Tech module is a 4 GB DDR3L SODIMM built for laptop and all-in-one systems that accept 204-pin PC3L-10600 memory. It runs at 1333 MHz with CL9 latency and 1.35 V low-voltage operation. The unbuffered, non-ECC design targets everyday computing and multitasking upgrades.

Who It Suits

The stick fits owners of notebooks or compact desktops needing a single 4 GB replacement that matches the Micron MT16KTF51264HZ-1G4 series specifications. It is not for systems limited to 2 GB maximum capacity, boards requiring ECC or registered modules, or platforms that only support standard 1.5 V DDR3.

Deciding Specification

The 1.35 V DDR3L voltage is the critical compatibility gate; a motherboard that cannot run low-voltage DDR3 will not post with this module. Verify the laptop manual or BIOS memory table for PC3L-10600 support before ordering.

Kohokohdat

  • Boosts system speed with 1333 MHz DDR3L performance
  • Low 1.35 V DDR3L voltage cuts power draw
  • 204-pin SO-DIMM fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility
  • Replaces Micron MT16KTF51264HZ-1G4 series modules directly

Tekniset tiedot

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Will this 204-pin DDR3L SODIMM fit my laptop's memory slot?

The module uses the standard 204-pin SO-DIMM form factor and 1.35V DDR3L signalling, so it fits any laptop slot designed for DDR3L 1333 memory.

What is the correct way to seat the module, and what step do people often miss?

Insert the module at an angle until the gold contacts are fully hidden, then press down evenly until the retention clips on both sides snap into the notches.

When will this 4GB DDR3L 1333 module need replacement?

Memory has no moving parts; replace it only if a diagnostic tool reports errors or if you upgrade to a higher capacity supported by your system.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.