Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 4GB DDR3L 1333MHz 204-Pin SODIMM Laptop RAM

SKU CH-JFBM-K7A6D

A 4 GB DDR3L SODIMM running at 1333 MHz with CL9 latency and 1.35 V low voltage for laptop upgrades

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCNo
  • Boosts system speed with 1333 MHz DDR3L performance
  • Low 1.35 V DDR3L voltage cuts power draw
  • 204-pin SO-DIMM fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility
  • Replaces Micron MT16KTF51264HZ-1G4 series modules directly

Product Identity

This A-Tech module is a 4 GB DDR3L SODIMM built for laptop and all-in-one systems that accept 204-pin PC3L-10600 memory. It runs at 1333 MHz with CL9 latency and 1.35 V low-voltage operation. The unbuffered, non-ECC design targets everyday computing and multitasking upgrades.

Who It Suits

The stick fits owners of notebooks or compact desktops needing a single 4 GB replacement that matches the Micron MT16KTF51264HZ-1G4 series specifications. It is not for systems limited to 2 GB maximum capacity, boards requiring ECC or registered modules, or platforms that only support standard 1.5 V DDR3.

Deciding Specification

The 1.35 V DDR3L voltage is the critical compatibility gate; a motherboard that cannot run low-voltage DDR3 will not post with this module. Verify the laptop manual or BIOS memory table for PC3L-10600 support before ordering.

Prednosti

  • Boosts system speed with 1333 MHz DDR3L performance
  • Low 1.35 V DDR3L voltage cuts power draw
  • 204-pin SO-DIMM fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility
  • Replaces Micron MT16KTF51264HZ-1G4 series modules directly

Špecifikácie

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Otázky k tomuto produktu

Will this 204-pin DDR3L SODIMM fit my laptop's memory slot?

The module uses the standard 204-pin SO-DIMM form factor and 1.35V DDR3L signalling, so it fits any laptop slot designed for DDR3L 1333 memory.

What is the correct way to seat the module, and what step do people often miss?

Insert the module at an angle until the gold contacts are fully hidden, then press down evenly until the retention clips on both sides snap into the notches.

When will this 4GB DDR3L 1333 module need replacement?

Memory has no moving parts; replace it only if a diagnostic tool reports errors or if you upgrade to a higher capacity supported by your system.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.